Sun Microsystems Virtual Tape Library User Manual page 72

Managing virtual libraries
Otherwise, the wizard skips directly to the Specify Batch Mode
Information dialog. So go to "Allocating disk space to virtual tapes" on page 60.
Setting Auto Archive parameters for virtual tape volumes
If the new virtual tapes will reside in a library that has the Auto Archive option
enabled, proceed as follows.
1. In the Select a Physical Tape Library dialog, check the Create virtual
tape(s) to match physical tape(s) ... check box (
Checking the Create virtual tape(s) to match physical tape(s) ...
check box insures that the barcodes of the new virtual tapes will match those of the
physical tapes, thus fulfilling an essential prerequisite for auto archiving.
58 VTL User Guide • May 2008
A
nnn.nnn.nnn.nnn ...
below). Press Next (
A
nnn.nnn.nnn ...
B
).
B
G • 96267