Sun Microsystems Virtual Tape Library User Manual page 259

Trap Severity
1047 Error
1048 Error
1049 Error
1050 Error
1051 Error
1052 Error
1053 Error
1054 Error
1055 Error
1056 Error
1057 Informational
1058 Informational
1059 Error
1060 Error
1061 Warning
1062 Informational
1063 Informational
1064 Informational
1065 Informational
1067 Error
1068 Error
1069 Error
1070 Error
1071 Error
1072 Error
1073 Error
96267 • G
Message
Rescan replica has failed for virtual device %1 -- the replica device failed
with error %2.
Rescan replica has failed for virtual device %1 -- the network transport
returned error %2.
Rescan replica cannot proceed -- replication control area not present on
virtual device %1
Rescan replica cannot proceed -- replication control area has failed for
virtual device %1
Rescan replica cannot proceed -- a merge is in progress for virtual device %1
Rescan replica failed for virtual device %1 -- replica status returned %2
Rescan replica cannot proceed -- replication is already in progress for
virtual device %1
Replication cannot proceed -- a merge is in progress for virtual device %1
Replication failed for virtual tape %1 -- replica status returned %2
Replication control area exchange failed for virtual tape %1 -- the error code
is %2
Replication control area exchange has completed for virtual tape %1
Replication has finished for virtual tape %1. %2 KB in %3 seconds (%4KB/sec)
Replication failed for virtual tape %1 -- start replication returned %2
Rescan replica failed for virtual device %1 -- start scan returned %2
I/O path failure detected. Alternate path will be used. Failed path (A.C.S.L):
%1; New path (A.C.S.L): %2
Replication has been started for group %1; it was triggered by the watermark.
Replication has been started for group %1; it was triggered by the interval
schedule.
Replication has been started for group %1; it was triggered by the time of day
schedule.
Replication has been started for group %1; it was manually triggered by the
administrator.
Replication cannot proceed -- unable to connect to replica server %1.
Replication cannot proceed -- group %1 is corrupt.
Replication cannot proceed -- virtual tape %1 no longer has a replica or the
virtual tape replica does not exist.
Replication cannot proceed -- replication is already in progress for group %1.
Replication cannot proceed -- virtual tape %1 no longer has a replica or the
virtual tape replica does not exist.
Replication cannot proceed -- missing a remote replica device in group %1.
Replication cannot proceed -- unable to open configuration file.
Appendix D SNMP traps 245