Configuring Physical Libraries And Devices - Sun Microsystems Virtual Tape Library User Manual

Managing virtual libraries
Configuring physical libraries and devices
VTL software supports either direct‐attached libraries or, optionally, shared libraries
managed by ACSLS/Library Station software.
If you are using a direct‐attached library, see "Managing direct‐attached physical
tape storage" on page 34.
If you are using a shared library, see "Managing ACSLS and Library Station tape
pools" on page 38.
Managing direct‐attached physical tape storage
If you have a direct‐attached library or device, you must assign the library or device
to VTL using the VTL console software. Carry out the following tasks:
"Preparing physical libraries and devices for assignment" on page 34
"Assigning direct‐attached physical tape libraries/devices" on page 37.
Preparing physical libraries and devices for assignment
1. If you have not added a new physical library or tape device, stop here and go to
the next task.
34 VTL User Guide • May 2008 G • 96267