Sun Microsystems Virtual Tape Library User Manual page 175

ipstorckcfg check ipstor.conf (VTL configuration check) notifies the
administrator if the VTL software's XML configuration file, ipstor.conf,
changes. If changes are found or if no previous version exists, the script creates a
copy of the current file under the name ipstorconf.diff.nnn, where nnn is
the script-generated version number of the file.
diskusagechk.sh / 95 notifies the administrator if root file system utilization
exceeds a pre-defined percentage. If the current percentage is over the specified
percentage (by default, 95%). Copies of the script can be modified to monitor any
chosen mount point.
defaultipchk.sh eth0 10.1.1.1 notifies the administrator if the IP address
for the specified NIC does not match a specified value. Copies of the script can be
modified to monitor additional NICs.
ipstorstatus.sh runs the vtl status command and notifies the
administrator if one or more VTL software modules have stopped.
6. When the Set Email Alerts System Log Check Properties dialog
appears, add the regular expressions for any patterns that you want the
notification process to parse for when examining logs. To add an expression, press
Add (
provided. Press Next (
H
96267 • G
below) to bring up a dialog box, then enter the pattern in the space
H
) when ready.
J
J
Chapter 7 Configuring email alerts 161