Sun Microsystems Virtual Tape Library User Manual page 268

Trap Severity
11509 Informational
11510 Error
11511 Error
11512 Error
11513 Informational
11514 Error
11515 Informational
11516 Error
11517 Informational
11518 Error
11519 Informational
11520 Error
11521 Informational
11522 Error
11523 Informational
11524 Error
11525 Informational
11530 Error
11531 Informational
11532 Error
11533 Informational
11534 Error
11535 Error
11536 Informational
11537 Error
11538 Informational
254 VTL User Guide • May 2008
Message
Console (%1): Properties set for the VTL Server.
Console (%1): Failed to save report -- %2.
Console (%1): Failed to get the information for the NIC.
"Console (%1): Failed to add a replica for virtual tape %2 to VTL Server %3
(watermark: %4 MB, time: %5, interval: %6, watermark retry: %7, suspended:
%8)."
"Console (%1): Replica for virtual tape %2 was added to VTL Server %3
(watermark: %4 MB, time: %5, interval: %6, watermark retry: %7, suspended:
%8)."
"Console (%1): Failed to remove the replica for virtual tape %2 from VTL
Server %3 (watermark: %4 MB, time: %5, interval: %6, watermark retry: %7,
suspended: %8)."
"Console (%1): Replica for virtual tape %2 was removed from VTL Server %3
(watermark: %4 MB, time: %5, interval: %6, watermark retry: %7, suspended:
%8)."
Console (%1): Failed to create the virtual tape replica %2.
Console (%1): Virtual tape replica %2 was created.
Console (%1): Failed to start replication for virtual tape %2.
Console (%1): Replication for virtual tape %2 started.
Console (%1): Failed to stop replication for virtual tape %2.
Console (%1): Replication for virtual tape %2 stopped.
Console (%1): Failed to promote virtual tape replica %2 to a virtual tape.
Console (%1): Virtual tape replica %2 promoted to a virtual tape.
Console (%1): Failed to run VTL Server X-Ray.
Console (%1): VTL Server X-Ray has been run.
Console (%1): Failed to back up configuration files.
Console (%1): Backed up Configuration files successfully.
Console (%1): Failed to restore configuration files.
Console (%1): Restored VTL configuration files successfully.
Console (%1): Failed to reset the umap for virtual device %2.
"Console (%1): Failed to update the replication parameters for virtual tape %2
to VTL Server %3 (watermark: %4 MB, time: %5, interval: %6, watermark retry:
%7, suspended: %8)."
"Console (%1): Replication parameters for virtual tape %2 to VTL Server %3
updated (watermark: %4 MB, time: %5, interval: %6, watermark retry: %7,
suspended: %8)."
Console (%1): Failed to claim physical device %2.
Console (%1): Physical device %2 has been claimed.
G • 96267