Sun Microsystems Virtual Tape Library User Manual page 115

Managing tapes
Checking replication status from the target VTL server
1. In the object tree of the VTL console, drill down to the Replica Resources
node (
A
B
2. Select the replica resource corresponding to the primary virtual tape (
3. In the properties sheet at the right, select the General tab (
4. Scan down the sheet until you see the Replication Status row (
Stop here.
Checking replication status with a report
1. Use the procedure in "Creating a report" on page 123 to create a Replication Status
Report
While a report can be generated for a single tape, it is most useful for assessing the
replication status of multiple tapes. Reports can be created to fit a range of criteria,
including:
96267 • G
below).
A
all tapes that have replication enabled
all tapes replicated from a source server
all tapes replicated to a target server
all tapes in a given range of dates.
C
D
above))
B
above).
C
above).
D
Chapter 4 VTL operations 101