Sun Microsystems Virtual Tape Library User Manual page 261

Trap Severity
7002 Error
7003 Error
7004 Warning
7005 Error
7006 Error
7007 Informational
7008 Warning
7009 Error
10000 Informational
10001 Error
10002 Error
10003 Error
10004 Error
10005 Error
10006 Error
10007 Informational
10050 Informational
10051 Informational
10052 Informational
10053 Informational
10054 Error
10055 Informational
10056 Informational
10057 Informational
10058 Informational
10059 Error
10060 Informational
10100 Error
10101 Error
10102 Error
10200 Warning
10201 Warning
10202 Informational
96267 • G
Message
Patch %1 failed -- it applies only to build %2.
Patch %1 failed -- you must be the root user to apply the patch.
Patch %1 installation failed -- it has already been applied.
Patch %1 installation failed -- prerequisite patch %2 has not been applied.
Patch %1 installation failed -- cannot copy new binaries.
Patch %1 rollback completed successfully.
Patch %1 rollback failed -- there is no original file to restore.
Patch %1 rollback failed -- cannot copy back previous binaries.
VTL Server setup has begun.
Insufficient privilege (uid: %1).
VTL Server environment is corrupt.
Failed to initialize configuration %1.
Failed to get SCSI device information.
A physical device will not be available because we cannot create a Global
Unique Identifier for it.
Failed to write configuration %1.
VTL Server setup is complete.
VTL Server FSID update has begun.
"VTL Server FSID update vdev %1, local sect %2, pdev sect %3, from %4 to %5."
"VTL Server FSID update pdev a:%1, c:%2, s:%3, l:%4 from %5 to %6."
VTL Server FSID update dynamic xml pdev from %1 to %2.
VTL Server FSID update error.
VTL Server FSID update is complete.
Server Persistent Binding update has begun.
"Server Persistent Binding update, swap binding %1."
"Server Persistent Binding update, set default binding for %1."
Server Persistent Binding update error.
"Server Persistent Binding update is complete, %1 changes."
Failed to scan new SCSI devices.
Failed to update configuration %1.
Failed to add new SCSI devices.
Configuration %1 exists.
Overwriting existing configuration %1.
Cancelled overwriting configuration %1.
Appendix D SNMP traps 247