Add Client; Delete Client - Sun Microsystems Virtual Tape Library User Manual

Virtual devices / Clients
Add client
iscon addclient -s <server-name> [-u <username> -p <password>]
-c <client-name>
[-I <initiator-wwpns>] [-a <on|off>] [-A <on|off>]] | [-C <on|off>] [-X <rpc-
timeout>]
iscon addclient --server-name=<server-name>
[--server-username=<username> --server-password=<password>]
--client-name=<client-name> [--initiator-wwpns=<initiator-wwpns>]
[--enable-VSA=<on|off>] [--enable-iSeries=<on|off>]] | [--enable-
Celerra=<on|off>]
[--rpc-timeout=<rpc-timeout>]
Description:
This command allows you to add a client to the specified server. ‐c (‐‐client‐name) is
a unique client name for the client to be created. The maximum length of the client
name is 64. The following characters are invalid for a client name: <>ʺ&$/\ʹ
‐I (‐‐initiator‐wwpns) is the option to set the initiator WWPNs. An initiator WWPN
is a 16‐byte Hex value. Separate initiator WWPNs with commas if more than one
initiator WWPN is specified. For example: 13af35d2f4ea6fbc,13af35d2f4ea6fad
‐a (‐‐enable‐VSA) is an option for Volume Set Addressing with the following values:
on or off (default).
‐A (‐‐enable‐iSeries) is an option to support IBM iSeries Server with the following
values: on or off (default).
‐C (‐‐enable‐Celerra) is an option to support Celerra with the following values: on or
off (default).
Enabling Celerra will automatically disable VSA and iSeries, and vice versa.
‐X (‐‐rpc‐timeout) is an option to specify a number between 1 and 30000 in seconds
for the RPC timeout. The system will retry the command for the amount of time
specified if the server does not respond. The default RPC timeout is 30 seconds.
Delete client
iscon deleteclient -s <server-name> [-u <username> -p <password>]
-c <client-name> [-X <rpc-timeout>]
iscon deleteclient --server-name=<server-name>
[--server-username=<username> --server-password=<password>]
--client-name=<client-name> [--rpc-timeout=<rpc-timeout>]
Description:
174 VTL User Guide • May 2008 G • 96267