Sun Microsystems Virtual Tape Library User Manual page 279

Trap Severity
19051 Informational
19052 Informational
19053 Informational
19054 Informational
19055 Informational
19056 Error
19057 Error
19058 Error
19059 Error
19060 Error
19061 Error
19062 Error
19063 Error
19064 Error
19065 Error
19066 Error
19200 Error
19201 Error
19202 Error
19203 Informational
96267 • G
Message
[Remote Copy] The copying of the virtual tape %1 to the remote server has been
started.
[Remote Copy] The copying of the virtual tape %1 to the remote server has
finished.
"[Remote Copy] The configuration for remote copy is removed. Server: %1,
Virtual Tape: %2, Remote Server: %3, Tape Replica: %4."
[Remote Copy] The replica of the virtual tape %1 has been moved to the virtual
library %2 on the remote server successfully.
"[Remote Copy] The virtual tape has been copied to the remote server
successfully. Server: %1, Virtual Tape: %2, Remote Server: %3, Tape Replica:
%4."
"[Remote Copy] The copying of the virtual tape to the remote server has failed
while %1. Error: %2. (Server: %3, Virtual Tape: %4, Remote Server: %5, Tape
Replica: %6)"
[Remote Copy] The copying of the virtual tape to the remote server cannot
proceed -- unable to connect to remote server %1.
[Remote Copy] The copying of the virtual tape to the remote server cannot
proceed -- virtual tape %1 no longer has a replica or the replica does not
exist.
[Remote Copy] The copying of the virtual tape to the remote server cannot
proceed -- virtual tape %1 no longer has a replica or the replica does not
exist.
[Remote Copy] The copying of the virtual tape to the remote server cannot
proceed -- unable to open configuration file.
[Remote Copy] The copying of the virtual tape to the remote server cannot
proceed -- unable to allocate memory.
[Remote Copy] The copying of the virtual tape to the remote server cannot
proceed -- unexpected error %1.
[Remote Copy] The copying of the virtual tape %1 to the remote server has been
manually aborted by user
[Remote Copy] The copying of the virtual tape to the remote server cannot
proceed -- failed to load the virtual tape %1.
[Remote Copy] The copying of the virtual tape to the remote server cannot
proceed -- virtual tape %1 is in the drive.
[Remote Copy] The copying of the virtual tape to the remote server cannot
proceed -- failed to set initialization status in VirtualLibrary System for
virtual tape %1.
Console (%1): Failed to get the key list.
Console (%1): Failed to get the key.
Console (%1): Failed to create key %2.
Console (%1): Key %2 has been created successfully.
Appendix D SNMP traps 265