Sun Microsystems Virtual Tape Library User Manual page 44

Managing network connectivity
Note the Enable SSH, Enable FTP, and Allow root to login in telnet
session check boxes. While ssh is enabled by default, ftp and remote login by
root are disabled for security reasons. Sun recommends that you leave these options
set to the defaults. For secure remote access, use the vtladmin account with ssh or
sftp. Then, if root privileges are required, use the su command after logging in.
10. When you return to the Network Configuration property sheet, click OK
( above).
N
11. When you are prompted to restart the network, press Yes (
The network should restart automatically.
12. Reconnect to the VTL server node.
Stop here.
Setting the VTL server node host name
1. When the Set Hostname dialog appears, enter a valid name for your VTL
appliance (
Valid characters include letters, numbers, underscores, and dashes.
2. Press OK (
30 VTL User Guide • May 2008
O
below).
A
A
above).
B
B
below).
O
G • 96267