Remove A License Keycode; Get Vtl Info - Sun Microsystems Virtual Tape Library User Manual

System configuration
Remove a license keycode
iscon removelicense -s <server-name> [-u <username> -p <password>] -k
<license-keycode>
[-X <rpc-timeout>]
iscon removelicense --server-name=<server-name>
[--server-username=<username> --server-password=<password>] --
license=<license-keycode>
[--rpc-timeout=<rpc-timeout>]
Description:
This command removes a license keycode.
‐X (‐‐rpc‐timeout) is an option to specify a number between 1 and 30000 in seconds
for the RPC timeout. The system will retry the command for the amount of time
specified if the server does not respond. The default RPC timeout is 30 seconds.
Get VTL info
iscon getvtlinfo -s <server-name> [-u <username> -p <password>]
[-T <vtl-info_type> [-L <tape-library-vid>]] [-F <vtl-info-filter>] [-l [-M]]
[-X <rpc-timeout>]
iscon getvtlinfo --server-name=<server-name>
[--server-username=<username> --server-password=<password>]
[--vtl-info-type=<vtl-info-type> [--tape-library-vid=<tape-library-vid>] ]
[--vtl-info-filter=<vtl-info-filter>]
[--longlist [--ouput-delimiter=<output-delimiter>] ] [--rpc-timeout=<rpc-
timeout>]
Description:
This command retrieves VTL information.
‐T (‐‐vtl‐info‐type) is the VTL information type with one of the following values:
VLIBS or VDRIVES or VAULT or PLIBS or PDRIVES.
VLIBS = display virtual tape libraries only.
VDRIVES = display standalone virtual tape drives only
VAULT = display virtual tape vault only.
PLIBS = display physical tape libraries only.
PDRIVES = display standalone physical tape drives only.
The default is to display all the information.
‐L (‐‐tape‐library‐vid) is an option to specify the virtual tape library when VLIBS is
specified, or to specify the physical tape library when PLIBS is specified.
96267 • G Appendix A VTL command line reference 195