Sun Microsystems Virtual Tape Library User Manual page 282

Trap Severity
26207 Error
26208 Error
26209 Error
26210 Informational
27000 Error
27001 Error
27002 Error
27003 Error
27004 Error
27005 Error
27006 Error
27007 Error
27008 Error
28001 Error
28002 Error
28003 Error
28004 Error
28005 Error
29101 Informational
29102 Informational
29401 Informational
29402 Informational
29403 Warning
29404 Warning
29405 Error
29406 Warning
40000 Informational
40001 Informational
40002 Error
40003 Error
40004 Error
40005 Error
40006 Error
268 VTL User Guide • May 2008
Message
Failed to define device %1 -- %2.
Failed to undefine device %1 -- %2.
Drive %1 is busy and cannot be detached.
time.
Both %1 and %2 have the same disk signature (%3).
Failed to connect to VTL Server '%1' -- %2.
Failed to get the version of VTL Server '%1' -- %2.
Failed to get the information for VTL Server '%1' -- %2.
Failed to get the number of adapters for VTL Server '%1' -- %2.
Failed to get the information for VTL Server '%1' adapter %3 -- %2.
Failed to get the number of devices for VTL Server '%1' -- %2.
Failed to get the information for VTL Server '%1' device %3 -- %2.
Failed to get the list of IP addresses for VTL Server '%1' -- %2.
Failed to get the media information for VTL Server '%1' device %3 -- %2.
Failed to add VTL Server '%1' -- %2.
Failed to add VTL Server '%1' adapter %2 -- %3.
Failed to add VTL Server '%1' adapter %2 channel %3 -- %4.
Failed to add VTL Server '%1' device %2 -- %3.
Failed to add VTL Server '%1' device %2 volume %3 -- %4.
VTL Server '%1' failed over.
VTL Server '%1' recovered from failover.
Backing up VTL Server '%1' device %2.
Backed up VTL Server '%1' device %2.
Backup of VTL Server '%1' device %2 failed.
"VTL Notify user specified error %1, description '%2'."
"Notify Timeout error, waiting on %1, timeout set to %2."
Notify Error waiting on %1.
TLE Module Started
TLE Module Stopped
Block list full on Drive %1
"Corrupt Repository, Rep VID %1"
Unsupported device [%1][%2][%3]
"Load Drive failed. Lib %1, Drive %2"
"TDE get drive info failed, Drive %1, EC %2"
The SAN Client cannot stop at this
G • 96267