Sun Microsystems Virtual Tape Library User Manual page 285

Trap Severity
40070 Error
40071 Error
40072 Informational
40073 Informational
40074 Error
40075 Informational
40076 Error
40077 Error
40078 Error
40079 Informational
40080 Warning
40081 Warning
40082 Warning
40083 Warning
40084 Warning
40085 Error
40087 Error
40088 Error
40089 Error
40090 Error
40091 Error
40092 Error
40093 Error
40094 Error
40095 Error
40096 Error
40097 Error
40098 Error
40099 Error
96267 • G
Message
Cannot delete Tape %1
"Cannot import Tape, dest slot %1 in Virtual Library %2 is full"
"Properties of Tape %1 has been changed. Barcode %2, MaxCapacity %3 MB"
"Tape Created in Stand Alone Virtual Tape Drive. Tape VID %1, Drive VID %2"
"Export to Physical Tape failed. Job ID %1, EC %2, SrcTape [%3] DestTape [%4]"
"Export Job %1 submitted to Physical stand alone Tape Drive %2, SrcTape [%3],
%4"
"Import Physical Tape failed. Job ID %1, EC %2, SrcTape [%3] DestTape [%4]"
Import Physical Tape failed. Duplicate Virtual Tape Barcode. Job ID %1
DestTape [%2]
Import Physical Tape failed. Duplicate Virtual Tape Barcode. Dest Tape [%1]
"Deleted tape marked for delayed deletion. Tape [%1], VID %2"
Tape drive %1 in physical library %2 not accessible. Locked by other party
Tape [%1] in physical library %2 not accessible. Locked by other party
Slot %1 in physical library %2 not accessible. Locked by other party
Inventory physical library %1: Tape [%2] or Slot %3 not accessible. Locked by
other party
Tape [%1] is blank. Cannot export blank tapes
Reverse block command failed on physical tape drive VID %1 Error [%2]
Error in retrieving the hostname of this VTL server. Error: %1
Failure in looking up the IP address of the VTL server (%1). Please verify
that DNS is configured correctly for both ACSLS and VTL server. Error: %2
Out of system resources. Could'nt fork a process. Error: %1
Failed to execute a program. Error: %1
Failed to open %1. Error: %2
DNS configuration for VTL server is incorrect. DNS or /etc/hosts is returning
%1 as the IP of VTL server (%2)
Failed to successfully query %1 server with IP %2. Error received: %3.
Waited %1 seconds to get a response to a query from %2 (%3). Timing out.
Failed to mount %1 on drive %2. Error from %3 (%4): %5.
Waited %1 seconds to get a response from %2 (%3) after trying to mount %4 on
drive %5. Timing out.
Failed to dismount %1 from drive %2. Error from %3 (%4): %5.
Waited %1 seconds to get a response from %2 (%3) after trying to dismount %4
from drive %5. Timing out.
Failed to retrieve drive information in ACS %1. Error from %2 (%3): %4.
Appendix D SNMP traps 271