Sun Microsystems Virtual Tape Library User Manual page 267

Trap Severity
11298 Error
11300 Error
11301 Error
11302 Error
11303 Error
11304 Informational
11305 Informational
11306 Error
11307 Error
11308 Error
11309 Error
11310 Error
11311 Error
11312 Informational
11313 Error
11314 Informational
11400 Error
11401 Error
11402 Error
11403 Error
11404 Error
11405 Error
11406 Error
11407 Error
11408 Warning
11500 Error
11501 Error
11502 Error
11503 Informational
11504 Error
11505 Error
11507 Error
11508 Error
96267 • G
Message
Console (%1): Failed to reset cache on target device %2 (ID: %3) for %4 copy.
Invalid user name (%1) used by client at IP address %2.
Invalid password for user (%1) used by client at IP address %2.
Invalid passcode for machine (%1) used by client at IP address %2.
Authentication failed in stage %1 for client at IP address %2.
User %1 at IP address %2 authenticated.
Machine %1 at IP address %2 authenticated.
The VTL Administrator group does not exist.
User %1 at IP address %2 is not a member of the VTL Administrator's group.
The VTL Client group does not exist.
User ID %1 at IP address %2 is invalid.
VTL Client User name %1 does not match with the client name %2.
Client agent %1 failed to request license.
Client agent %1 requested license successfully.
Client agent %1 failed to release license.
Client agent %1 released license successfully.
Failed to communicate with the Self-Monitor module.
Failed to release IP address %1.
Failed to read %1.
Failed to retrieve authentication information.
Failed to merge authentication information.
Failed to obtain IP address %1.
Failed to prepare the failover configuration package -- %1.
Failed to extract the failover configuration package -- %1.
Synchronizing the system time with %1. A system reboot is recommended.
Out of disk space to expand virtual tape %1.
Failed to expand virtual tape %1: maximum segment exceeded (error code %2).
Failed to expand virtual tape %1 (segment allocation error code %2).
Expand %1 by %2 MBytes.
Failed to expand virtual tape id %1 by %2 MBytes.
Failed to change virtual tape %1 to direct link mode.
Console (%1): Failed to create X-Ray file.
Console (%1): Failed to set the properties for the VTL Server.
Appendix D SNMP traps 253