Sun Microsystems Virtual Tape Library User Manual page 113

Managing tapes
Suspending and resuming replication
You can manually suspend forthcoming replications that would otherwise be
launched automatically from your replication policies (currently active replications
are unaffected). To do so, proceed as follows.
1. Right‐click on the primary virtual tape, and select Replication and Suspend
from the context menus.
2. If desired, you can synchronize replicas manually during the suspension period
by right‐clicking on the primary virtual tape, and selecting Replication and
Synchronize from the context menus.
3. To continue with normal replication, right‐click on the primary virtual tape, and
select Replication and Resume from the context menus.
Stop here.
Stopping a replication that is already under way
1. To stop a replication that is currently in progress, right‐click on the primary
virtual tape.
2. Select Replication from the context menu.
3. Select Stop from the following context menu.
Stop here.
96267 • G Chapter 4 VTL operations 99