Sun Microsystems Virtual Tape Library User Manual page 169

Failback
28. Run the vtl status command:
VTL_Plus
[
Sun Microsystems VTL Server vn.nn (Build nnnn)
Copyright 2001-2007 by FalconStor. All Rights Reserve
Status of VTL SNMPD Module................ [RUNNING]
Status of VTL QLogic Module............... [RUNNING]
Status of VTL Authentication Module....... [RUNNING]
Status of VTL Server (Compression) Module. [RUNNING]
Status of VTL Server (FSNBase) Module..... [RUNNING]
Status of VTL Server (Upcall) Module...... [RUNNING]
Status of VTL Server (Event) Module....... [RUNNING]
Status of VTL Server (Path Manager) Module [RUNNING]
Status of VTL Server (Application)........ [RUNNING]
Status of VTL FC Target Module............ [RUNNING]
Status of VTL Server VTL Upcall Module.... [RUNNING]
Status of VTL Server VTL Upcall Daemon.... [RUNNING]
Status of VTL Server VTL Module........... [RUNNING]
Status of VTL Communication Module........ [RUNNING]
Status of VTL Logger Module............... [RUNNING]
Status of VTL Self Monitor Module......... [RUNNING]
Status of VTL Failover Module............. [RUNNING]
29. If one or more VTL processes are not RUNNING, stop the server software and then
restart:
VTL_Plus
[
...
VTL_Plus
[
96267 • G
]vtladmin# vtl status
]vtladmin# vtl stop all
]vtladmin# vtl start
Chapter 6 Recovery following a system failure 155