Sun Microsystems Virtual Tape Library User Manual page 43

Managing network connectivity
5. When the IP Address Configuration property sheet appears, click the Static
radio button (
6. Click the Edit button (
provided.
7. Leave the MTU text field (
8. Press OK (
You return to the Network Configuration property sheet.
9. If Network Time Protocol (NTP) is in use, press Config NTP (
Network time Protocol Servers dialog appears, use the controls provided (
enter the NTP server IP addresses. Click OK (
ntp_server_name
96267 • G
F below).
NIC_name nnn.nnn.nnn.nnn
G
H
above), and enter the IP address that the customer
G
above) as set by the factory.
H
J above).
M
F
J
).
M
NIC_name
K
L
above). When the
K
) to
L
N
Chapter 4 VTL operations 29