Sun Microsystems Virtual Tape Library User Manual page 50

Managing virtual libraries
5. When the Select Physical Devices panel appears, use the check boxes
and/or the selection buttons (
want to assign to the VTL system. Press Next (
If you are configuring an IBM iSeries/AS400 solution, assign IBM Magstar 3590E11,
3592, or Ultrium LTO1, LTO2, or LTO3 physical drives to the virtual tape library for
use in import and export operations.
A
6. When the Prepare Device panel appears, press Finish.
Next task: "Assigning direct‐attached physical tape libraries/devices" on page 37.
36 VTL User Guide • May 2008
F below) to select the libraries or devices that you
).
G
B
G • 96267