Sun Microsystems Virtual Tape Library User Manual page 290

Description
Change the host serial port configuration.
Note: This speed setting must match the speed
setting for serial port 0, COM1 or /dev/ttyS0 on
the host operating system.
Alert Commands
Display information about PET alerts. You can
configure up to 15 alerts.
Change alert configuration.
System Management Access Commands
Display information about HTTP settings.
Change HTTP settings, such as enabling
automatic redirection to HTTPS.
Display information about HTTPS access.
Change HTTPS settings.
Display SSH DSA key settings.
Display SSH RSA key settings.
SNMP Commands
Display information about SNMP settings. By
default, the SNMP port is 161 and v3 is enabled.
Display SNMP users.
Add an SNMP user.
Delete an SNMP user.
Display information about SNMP public (read‐
only) communities.
Add this device to an SNMP public community.
Delete this device from an SNMP public
community.
Display information about SNMP private (read‐
write) communities.
Add this device to an SNMP private community.
276 VTL User Guide • May 2008
Command
set /SP/serial/host pendingspeed=integer
commitpending=true
show /SP/alert/rules/1...15
set /SP/alert/rules/1...15 destination=ipaddress
level=down|critical|major|minor
show /SP/services/http
set /SP/services/http port=portnumber
secureredirect enabled|disabled
servicestate=enabled|disabled
show /SP/services/https
set /SP/services/https port=portnumber
servicestate=enabled|disabled
show /SP/services/ssh/keys/dsa
show /SP/services/ssh/keys/rsa
show /SP/services/snmp engineid=snmpengineid
port=snmpportnumber sets=enabled|disabled
v1=enabled|disabled v2c=enabled|disabled
v3=enabled|disabled
show /SP/services/snmp/users
create /SP/services/snmp/users/snmpusername
authenticationpassword=password
authenticationprotocol=MD5|SHA
permissions=rw|ro privacypassword=password
privacyprotocol=none|DES
delete /SP/services/snmp/users/
show /SP/services/snmp/communities/public
create /SP/services/snmp/communities/public/
delete /SP/services/snmp/communities/public/
show /SP/services/snmp/communities/private
create /SP/services/snmp/communities/private/
snmpusername
comm1
comm1
comm2
G • 96267