Snmp Traps - Sun Microsystems Virtual Tape Library User Manual

D
APPENDIX
SNMP traps
The VTL product family defines the following Simple Network Management
Protocol (SNMP) traps.
Trap Severity
9 Error
1000 Error
1001 Error
1002 Error
1003 Informational
1004 Informational
1005 Error
1006 Error
1007 Error
1008 Error
1009 Informational
1010 Informational
1011 Error
1012 Error
1013 Informational
1014 Informational
1015 Informational
1016 Informational
1017 Informational
96267 • G
Message
SCSI Port Error -- %1.
Socket connection could not be terminated properly -- %1.
Socket connection could not be terminated properly due to error during
shutdown -- %1.
Unexpected interrupt occurred.
"VTL Server has detected virtual device[%1] at SCSI %2, channel %3, ID %4, LUN
%5."
VTL Server has not detected any virtual device.
Out of kernel resources. Failed to get major number for VTL SCSI device.
Failed to allocate memory.
Failed to set up the network connection due to an error in SANRPC_Init -- %1.
Failed to set up the network connection due to an error in SANRPCListen -- %1.
There are %1 real device(s) associated with virtual device [%2].
Real Device[%1 %2 %3 %4].
Error while writing -- write(%1) result = 0x%2 cmd = 0x%3.
Error while reading -- read(%1) result = 0x%2 cmd = 0x%3.
VTL Server [Build %1] is running on Linux %2.
VTL Server has been shut down.
"Maximum SCSI devices reached.
cat /proc/scsi/scsi"
Primary virtual device %1 has failed. VTL is switching to the secondary
virtual device.
Secondary virtual device %1 has failed.
On your VTL Server, verify with the command:
243