Sun Microsystems Virtual Tape Library User Manual page 258

Trap Severity
1020 Informational
1021 Informational
1022 Warning
1023 Error
1024 Informational
1025 Informational
1026 Informational
1027 Informational
1028 Informational
1029 Informational
1030 Error
1031 Error
1032 Error
1034 Error
1035 Error
1038 Error
1039 Error
1040 Error
1041 Informational
1042 Informational
1043 Error
1044 Error
1045 Informational
1046 Error
244 VTL User Guide • May 2008
Message
Replication for virtual tape %1 started.
Replication for virtual tape %1 finished.
Replication has failed for virtual tape %1 -- %2.
Failed to connect to physical device %1. Switching alias to %2.
Device %1 has attached to the VTL Server.
Device %1 has detached from the VTL Server.
Replication has been started for virtual tape %1; it was triggered by the
watermark.
Replication has been started for virtual tape %1; it was triggered by the
interval schedule.
Replication has been started for virtual tape %1; it was triggered by the time
of day schedule.
Replication has been started for virtual tape %1; it was manually triggered by
the administrator.
Failed to start replication -- replication is already in progress for virtual
tape %1.
Failed to start replication -- replication control area not present on virtual
tape %1.
Failed to start replication -- replication control area has failed for virtual
tape %1.
Replication failed for virtual device %1 -- the network transport returned
error %2.
Replication failed for virtual device %1 -- the local disk failed with error
%2.
Replication failed for virtual device %1 -- the local server could not
allocate memory.
Replication failed for virtual device %1 -- the replica failed with error %2.
Replication failed for virtual device %1 -- failed to set the replication
time.
Mirror synchronization started for virtual device %1.
Mirror synchronization finished for virtual device %1.
A SCSI command terminated with a non-recoverable error condition that was most
likely caused by a flaw in the medium or an error in the recorded data.
Please check the system log for additional information.
"A SCSI command terminated with a non-recoverable hardware failure (for
example, controller failure, device failure, parity error, etc.).
check the system log for additional information."
Rescan replica has completed for virtual device %1
Rescan replica has failed for virtual device %1 -- the local device failed
with error %2.
Please
G • 96267