Table of Contents
Advertisement
Emission Limit Setting
Start and stop frequency values can be changed but limited to values based on
the ETSI standards.
Figure 4-24
The number of ranges can be determined by the user as well as the start
frequency, stop frequency and limit. The user can add as many ranges as are
required and set the span for the start/stop frequencies. In order to change the
values, double click on which value needs to be modified as per the figure below.
Figure 4-25
Corrections can also be applied. please refer to
Tx and Rx Test Cases"
Keysight E8740A Automotive Radar Installation & User Guide
Emission Limit Setting
Change value
on page 125.
User Guide
"Corrections/ Calibrations for ETSI
4
139
Advertisement
Table of Contents
