Alternative Installation If Seatbelt Loosens - Britax Safe'n'Sound Instructions For Installation & Use

ALTERNATIVE INSTALLATION IF SEATBELT
LOOSENS
LAP-SASH SEAT BELT
If a seat belt will not stay tight, then a
Gated 3-Bar Slide may be used to prevent
loosening.
Obtain this part from most retailers of Safe-n
Sound products.
There may be two types of Gated Slides
available, Curved and Flat.
Before using the restraint, convert the lap-
sash seat belt by using the Gated 3-Bar Slide.
A. Hold the lap and sash straps together and fold as
shown. Slide the inner strap into the Gated 3-Bar
Slide followed by the outer strap.
B. The two straps should slide freely in the Gated 3-Bar
Slide slot.
C. Repeat previous step A for the other
slot in the Gated 3-Bar Slide.
54
Instructions for Installation & Use
Curved
Hollow side
Ensure the Lap portion of seat
belt is nearest to the restraint
Flat
Inner
strap
Faces
towards
restraint