Britax Safe'n'Sound Instructions For Installation & Use page 51

IF THE CAR IS FITTED WITH CHILD
RESTRAINT UPPER ANCHORAGE
POINT
Locate the upper anchorage point behind
the rear seating position. (Consult the car
owners handbook for the location of the upper
anchorage point). The upper anchorage point
should be directly behind and central to the
restraint. Remove thread plug from the parcel
shelf/floor/roof, etc. and install attachment bolt
and fitting as shown in Fig 1.
CAUTION: DO NOT OVERTIGHTEN
ATTACHMENT BOLT. OVERTIGHTENING
MAY FRACTURE OR BREAK BOLT.
MAXIMUM TORQUE IS 20 Nm(14.75 ft.lb.)
Note: Minimum of five full turns of attachment
bolt is required before tightening force is
applied.
INSTALLATION OF CAR'S UPPER
ANCHORAGE POINT
UPPER ANCHORAGE FITTING
Fig.1.
Vehicle trim
Front of Vehicle
Instructions for Installation & Use
Attachment Bolt
Lock washer
Anchor fitting
Spacer(s) if
required
Vehicle metal
structure
51