Britax Safe'n'Sound Instructions For Installation & Use page 63

HOW TO REPLACE THE BRITAX CLICK & GO™ADAPTOR
A. To attach the Britax CLICK & GO™ Adaptor to the Baby Capsule ensure the Capsule
Handle is in "Rocking position"
the trim away from the side of the Capsule to align the holes.
B. Align the Adaptor in the recess under the handle
pivot, push up and click into place.
C. Insert Locking Pin into hole. Align both top and
bottom holes.
D. Locate screw into the bottom hole and tighten
with screw driver. Do not overtighten.
* Refer to page 19 for handle position
BRITAX CLICK & GO™ADAPTOR
, disconnect the elastic under the handle and pull
2
TRAVEL SYSTEM
Push in under handle
Push in Locking Pin
Instructions for Installation & Use
Handle pivot
2
B
C
D
63