Britax Safe'n'Sound Instructions For Installation & Use page 32

HOW TO USE
PLACING INFANT IN CAPSULE
When positioning baby into Baby Capsule
make sure baby's back is fully supported onto
the flat section and the baby's nappy area
(bottom) is resting in the bottom curvature as
shown. It is recommended that bulky nappies
are not used when baby is travelling in the
Baby Capsule as they can cause incorrect
positioning of the baby's back in the Baby
Capsule.
A. Loosen shoulder straps by pressing the
harness adjuster and pull both shoulder straps
evenly. Pull out the desired amount of slack.
B. Place the two harness tongues
into the Buckle Tongue Holder
(if fitted).
Move the harness buckle
towards the harness adjuster for
easier fitment next time you put
the infant in the Capsule.
32
Instructions for Installation & Use
Press the harness adjuster
and pull both harness
straps evenly to loosen.
Buckle Tongue
Holder (if fitted)
Bottom curvature of Baby
Capsule