Britax Safe'n'Sound Instructions For Installation & Use page 19

ADJUSTMENT OF HANDLE POSITION
The Baby Capsule features a sturdy carry handle which can be used in conjunction with
the curved base to convert it to a rocker. At the base of the handle there are two large
buttons which control the three positions of the handle. These positions are the "carry (or
travel) position"
1
A. To convert from carry to "rocking position"
depress the large buttons on each side and rotate
the handle towards the front of the Baby Capsule.
When you have started rotating the handle release
the buttons and continue rotating the handle round
until it locks into position.
B. Ensure the handle is locked in position securely.
The "rocking position"
Capsule to rock without the possibility of the Baby
Capsule tipping over.
C. To convert to a "non-rocking"
both buttons and rotate the handle to the fixed
position. Ensure the handle is locked in position
securely.
IMPORTANT :
Do not place the Baby Capsule on a table or a
work-top where it could fall off.
USING THE BABY CAPSULE
, the "rocking position"
enables the Baby
2
3 position depress
, and the "non-rocking position"
2
1
2
,
2
Rocking Position
3
Instructions for Installation & Use
.
3
Carry Position
Non-rocking
Position
19