Alternative Installation Of Seatbelt Loosens; Lap-Sash Seat Belt - Britax Steelcraft Instructions For Use Manual

ALTERNATIVE INSTALLATION IF
SEATBELT LOOSENS

LAP-SASH SEAT BELT

If a seat belt will not stay tight, then
a Gated 3-Bar Slide may be used to
prevent loosening.
Before installing the restraint, join the
lap-sash seat belt by using the Gated
3-Bar Slide stored under the carrier.
A. Hold the lap and sash straps
together and fold as shown.
Slide the inner strap into the
Gated 3-Bar Slide followed by
the outer strap.
B. The two straps should slide
freely in the Gated 3-Bar Slide
slot.
52
Gated 3-Bar Slide
under the carrier
Inner
strap.
Faces
towards
restraint.
Hollow side
ALTERNATIVE INSTALLATION IF
C. Repeat previous step A for
the other slot in the Gated
3-Bar Slide.
D. Feed the straps through the
Gated 3-Bar Slide to remove
any slack.
Use this seat belt configuration to install the child restraint according
to the instructions on pages 21 to 23.
IMPORTANT:
Remove the gated 3 bar slide from the seat belt as soon as the
child restraint is removed so that an adult can use the seat belt as a
lap-sash seatbelt.
SEATBELT LOOSENS
Ensure the Lap
portion of seat
belt is nearest to
the restraint.
53