Travel System - Britax Click & Go™Adaptor - Britax Safe'n'Sound Instructions For Installation & Use

TRAVEL SYSTEM
BRITAX CLICK & GO™ADAPTOR
ATTACHING THE BABY CAPSULE TO THE STROLLER
FRAME
If the Baby Capsule is fitted with Britax CLICK & GO™ Adaptor, then fit as follows:
A. Remove Stroller seat or Carry cot from stroller frame
(refer to your stroller instructions).
B. The Baby Capsule will only fit the stroller in one direction.
The Baby Capsule must face the Stroller handle. With
the Baby Capsule handle in the upright position, just
place the CLICK & GO™ adapters over the stroller frame
sockets and push the Baby Capsule into the socket. The
adapters will lock the Capsule to the stroller.
Secure your baby into the Baby Capsule with the
harness provided on the Baby Capsule.
IMPORTANT :
Only use Baby Capsule with compatible Britax/Steelcraft Stroller or with other
brand strollers that have an approved Britax CLICK & GO™ receiver.
Pull upwards on both sides of the Baby Capsule to confirm it is locked into the
frame. If not locked on both sides, repeat above steps.
60
Instructions for Installation & Use
B