Britax Safe'n'Sound Instructions For Installation & Use page 45

TO REMOVE THE COVER
A. Remove the Canopy by unclipping the
press studs from the carry handle (see
page 20). Remove any baby insert
pad and head pillows (if supplied) as
described on page 48 to 49.
B. Disconnect the shoulder harness
straps from the Metal Strap Connector
and feed through shoulder slots in
both Baby Capsule and cover. Refer
to page 38.
C. Feed the shoulder harness straps
and tongues through lap strap slots
in the cover only. There is no need to
remove the harness straps from the
Baby Capsule.
D. Lift the cover around the rim of the
Baby Capsule at the harness adjuster
end, feed the crotch buckle through
the slot in cover and pull the harness
adjuster strap out of the slots.
E. Remove the cover for cleaning.
CARE & MAINTENANCE
Unclip press
studs on
carry handle
to remove
canopy
Metal Strap Connector
Pull elastic cover over Baby
Capsule
Instructions for Installation & Use
45