Britax Safe'n'Sound Instructions For Installation & Use page 38

HOW TO USE
REMOVING BABY FROM BABY CAPSULE
A. Rotate the carry handle to the "non-rocking position"
and ensure the Canopy is fully open.
B. Press the Harness Adjuster while pulling both shoulder
straps evenly to loosen the harness.
C. Press the red button on Harness Buckle to release both
harness tongues. Place buckle tongues through buckle
tongue holder's (if fitted) on each side of the cover or
padded insert otherwise place straps on each side of the
Capsule clear of the infant.
D. Feed the infants's arms through each side of the harness.
Lift the baby out of the Capsule.
NOTE: Once the baby gets heavier you may wish to leave the Capsule in the
car. In this case you will need to disconnect or loosen the top tether strap before
removing the baby.
38
Instructions for Installation & Use
Buckle Tongue
Holder (if fitted)