Britax Safe'n'Sound Instructions For Installation & Use page 62

TRAVEL SYSTEM
BRITAX CLICK & GO™ADAPTOR
HOW TO REMOVE THE BRITAX
CLICK & GO™ADAPTOR
To remove the Britax CLICK & GO™ Adaptor,
ensure handle is in "rocking position"
Cover removal is not necessary.
A. Lift out the plastic flaps on both sides of
the Baby Capsule cover next to the handle
pivot.
B. Carefully remove the screw with a screw
driver. Remove the Locking Pin. Pull out
the adaptor from carry handle.
Pull out Locking Pin
C. Store for future use with these instructions.
* Refer to page 19 for handle position
62
Instructions for Installation & Use
2
.
Pull down away
from under handle
Plastic flaps