Britax Safe'n'Sound Instructions For Installation & Use page 46

CARE & MAINTENANCE
TO REPLACE THE COVER
A. Place the cover over the Baby Capsule
ensuring all slots in cover line up with slots
in Baby Capsule.
B. Ensure that there are no twists in all straps
underneath the Baby Capsule.
C. Feed the shoulder harness straps through
the lap strap slots and then
thread the shoulder strap OVER bar
then re-attach the straps to metal strap
connector at the back of the seat. Refer to
page 30 to 31 for harness setup for your
baby. Feed shoulder harness straps though
the Baby Capsule. Attach the shoulder
harness straps to the strap connector.
D. Feed the crotch buckle through the slot
in trim and then through the crotch pad
attached to the cover.
Feed the harness adjuster strap through the
slots in the cover.
E. Refit and clips around the cover to the Baby
Capsule.
F. Engage shoulder harness tongues and
crotch buckle. Pull to check harness is
attached. Ensure the straps are not twisted.
G. Replace any baby insert pad and head
pillows (if supplied). To Replace Canopy
refer to page 20.
46
Instructions for Installation & Use
You MUST
and
Pull elastic cover over Baby Capsule
ALWAYS OVER THE BAR
Metal Strap Connector
Feed crotch
buckle
through slot
Feed though crotch
pad attached to cover