Table of Contents
Advertisement
HOW TO INSTALL USING SEATBELT
INSTALLING INTO THE CAR USING
SEATBELT AND TOP TETHER
Prepare the child seat by placing into recline mode
as detailed on page 31 'INSTALLING INTO VEHICLE
REARWARD FACING'.
A. Lengthen the harness by pressing the harness
adjustment button while pulling both shoulder
straps. Always pull straps together to avoid creating
slack in the straps.
B. Undo the buckle and place the buckle tongues in
the Harness Tongue Holders on each side of the
cover.
C. Place the rearward facing restraint in the chosen
seating position with the vehicle Seat Protector™
positioned centrally to that position. Ensure the
child seat is against the vehicle seat back. The
stabilising bar does not need to be in contact with
the vehicle seat, but must be extended and locked.
D. Remove the Infant Safety Cushion™. Lift centre
panel flap to expose the comfort pad from the seat
shell. Lift the comfort pad from the seat shell.
*See Accessories
32
Instructions for Installation & Use
Pull to lengthen
Push
Harness
Adjustment
Button
Infant Safety Cushion™
Vehicle Seat Protector™
A
Harness
Tongue
Holders*
B
Centre
panel flap
D
Advertisement
Table of Contents
