Table of Contents
Advertisement
11.6 Performing the regularly inspection
11.6.4 Other parameters
11.6.5 Entering parameters
Legally stipulated parameters
11 - 18
Other parameters can be updated or acknowledged if necessary:
•
Installation date
•
Date of the next calibration
•
etc.
Please refer to the test device instructions for information on how to
enter the calibration parameters.
The following parameters are legally stipulated and must be
updated or acknowledged:
•
Vehicle identification number
•
Vehicle registration number
•
Country of registration
•
Characteristic coefficient (w-value)
•
Recording equipment constant (k-value)*
•
Effective wheel circumference
•
Tire size
•
Legally permitted maximum speed
•
Odometer reading
•
UTC time
•
Calibration date*
* The DTCO 1381 sets this data automatically.
The DTCO 1381 automatically sets the calibration date and the
purpose of the calibration (4) when the workshop card is removed.
Via the menu functions you can print (printout vehicle "technical
data") or display (display vehicle "technical data") the calibration
date and the purpose for the calibration.
© Siemens VDO Automotive AG
Regularly inspection
Edition 07/2007
Advertisement
Chapters
Table of Contents
