9.3 Performing the activation
9.3
Performing the activation
Definition
9.3.1 Inserting workshop card
9 - 8
Activating the DTCO 1381 to be EC recording equipment (with the
first insertion of the workshop card).
Attention!
During activation, be absolutely certain that the DTCO 1381 is
operated in the specified voltage range!
The following instructions for "Inserting workshop card" are based
on a DTCO 1381 in the production status, symbol " " (1); i.e., the
DTCO 1381 has not yet been activated to be EC recording
equipment.
Fig. 9 - 1:
Inserting workshop card
1. Switch ignition on (required only for ADR variant).
2. Insert workshop card into card slot 1 with the chip facing up
(after insertion, the card will be automatically locked mechani-
cally).
• The subsequent procedure is menu-guided.
© Siemens VDO Automotive AG
1
Activation
Edition 07/2007