Removing Workshop Card; Menu Navigation After Removing Workshop Card - Siemens VDO DTCO 1381 Technical Description

3.4 Calibration mode

3.4.2 Removing workshop card

Menu navigation after removing workshop card

Step / menu display
1
2
3
4
5
6
1
3 - 20
1. Press the ejection button
workshop card is located.
• The subsequent procedure is menu-guided.
2. After the card has been released (mechanical unlocking of the
card), remove the workshop card from the card slot.
3. Use the button
as " ".
Explanation / meaning
The name of the cardholder appears; a progress bar shows that the
DTCO 1381 is transferring data to the workshop card.
Enter country at the end of the workday
– Select the country with the button
– acknowledge with the button
Cancel entry of country
– Press the button
Select region if required
– Select the region with the button
– acknowledge with the button
Continuation of data transfer to workshop card.
Print day value
– To print the day value, select "
select " " and
– acknowledge with the button
Continuation of data transfer to workshop card.
The workshop card is released, the standard display and the opera-
tional mode (1) appear.
© Siemens VDO Automotive AG
Operating the DTCO 1381
of the card slot in which the
or to set the respective activity, such
or
.
to cancel the entry of the country.
or
.
" with the button
.
and
and
or , or
Edition 07/2007