Table of Contents
Advertisement
Activation
9.1
General instructions
9.1.1 Terminology definitions
Edition 07/2007
Installation of the DTCO 1381 is divided into the following steps:
1. Installation
Mechanical and electrical installation of the DTCO 1381 compo-
nents into the vehicle.
2. Preprogramming
Preprogramming of all known or operationally necessary and
legally required parameters.
3. Installation and functional test
Test and demonstration that the entire system complies with
the permissible error limits concerning distance and speed,
defined by CR (EEC) 3821/85, annex I B.
4. Activation
Activation of the DTCO 1381 to be an EC recording equipment
(with the first insertion of the workshop card).
5. First calibration
First calibration of the EC recording equipment. Part of the first
calibration is, to enter the vehicle registration number.
Technical Description DTCO 1381
9.1 General instructions
9 - 3
Advertisement
Chapters
Table of Contents
