Siemens VDO DTCO 1381 Technical Description page 269

Events and faults
DTCO 1381 display
Picto. AP Error text
1)
For these messages the memory code (MC) is not shown in the display of the DTCO 1381.
Edition 07/2007
MC Error code Meaning, cause and measures
00000005B3 Communication error; the software upgrade was aborted.
Possible causes
•
•
•
•
Measures
– Check download interface of the DTCO 1381.
– Check data connection and data cable.
– Check the interface and the function of the management
– Repeat software upgrade.
Note
The DTCO 1381 may not be the cause of the error.
00000005B3 The software upgrade module could not be started; the
software upgrade was aborted.
Possible causes
•
Measures
– Check the DTCO 1381.
– Repeat software upgrade.
If the error message continues to appear despite these
measures, replace the DTCO 1381.
Technical Description DTCO 1381
13.4 Messages and troubleshooting measures
Software upgrade aborted by user.
Download interface of the DTCO 1381 defective.
Data connection interrupted or data cable defective.
Management device interface disturbed or blocked
device.
Internal fault of the DTCO 1381.
1)
1)
13 - 37