Events and faults
13.1 General information about messages
Edition 07/2007
The DTCO 1381 monitors the functionality of the system and auto-
matically announces and registers when a legally defined event, a
security breach, or a fault appears.
The DTCO 1381 does the following with event, fault, or safety-vio-
lation messages:
•
saves them in the data memory of the DTCO 1381 for analysis
•
saves them on the inserted tachograph cards for analysis
•
makes them available on the CAN bus (TCO status) for other
CAN stations
•
outputs them to the info interface (TCO status).
•
shown optically in the DTCO 1381 display and by means of
blinking of the display background illumination
Operational messages and messages about work-time violations are
not saved in the DTCO 1381 data memory.
The saved events and faults can be transferred (copied) over the
DTCO 1381 interfaces (such as the download interface) to external
devices.
During card-based messages, the card slot number will appear in
addition to the pictogram.
Technical Description DTCO 1381
13.1 General information about messages
13 - 3