Siemens VDO DTCO 1381 Technical Description page 215

Regularly inspection
Step / menu display
6
7
8
9
Edition 07/2007
Explanation / meaning
If incorrect PIN entered
– Acknowledge message with the button
number.
Cancel PIN entry
– Press the ejection button
workshop card is located.
– After the card has been released (mechanical unlocking of the
card), remove the workshop card from the card slot.
Attention!
If an incorrect PIN is entered five times, the workshop card will be
blocked and the process cancelled. The workshop card will be
ejected.
Display "Last withdrawal"; the date and time of the most recent card
withdrawal will be displayed in UTC time for approximately 3-5
seconds.
Manual entry
– To add activities manually, select "
select " " and
– acknowledge with the button
Comment
Please refer to the DTCO 1381 operating instructions for detailed
information on making manual entries.
Enter the country for the beginning or continuation of the
workday
– Select the country with the button
– acknowledge with the button
Cancel entry of country:
– Press the button
Select region if required
– Select the region with the button
– acknowledge with the button
This entry is required only in some countries, but the entry will be
requested automatically.
The beginning or end of the workday can be entered even without
an inserted workshop card or at times other than during insertion or
withdrawal of the card.
Technical Description DTCO 1381
11.6 Performing the regularly inspection
of the card slot in which the
" with the button
.
or
.
to cancel the entry of the country.
or
.
and re-enter the
or , or
and
and
11 - 15