Menu Function "Service - Siemens VDO DTCO 1381 Technical Description

3.3 Menu functions

3.3.4 Menu function "Service"

Step / menu display
1
2
3
3 - 14
If the DTCO 1381 is in the production status or calibration mode, the
additional "Service" menu function is available.
The software of the DTCO 1381 can be updated with the "Service –
SW-Upgrade" menu function.
You can only upgrade the user software of the DTCO 1381 if you
fulfil further requirements.
Explanation / meaning
– Select the menu function "Service" with the button
The current software version is shown in the first line.
– Acknowledge with the button
1
– Start the software upgrade with the
The DTCO 1381 starts the software upgrade function.
The question "data download done?" appears, i.e. the DTCO 1381
can be upgraded.
or
The message "upgrade module not present" appears, i.e. the DTCO
1381 cannot be upgraded.
Cancel the software upgrade
– Cancel the software upgrade with the button
The message "upgrade aborted" appears.
After approx. one minute or pressing the button
returns to the menu "Service".
Detailed information on the "Software-Upgrade" is contained in the
Technical Description "Software-Upgrade DTCO 1381".
© Siemens VDO Automotive AG
Operating the DTCO 1381
or
.
button.
.
the DTCO 1381
Edition 07/2007
.