Table of Contents
Advertisement
9.1 General instructions
9.1.5 Handling the tachograph cards
9 - 6
Attention!
Possession of a tachograph card authorizes the holder to use the
digital tachograph. The tachograph cards are person-specific
(workshop cards are company-specific) and are therefore not trans-
ferrable to others!
An accredited workshop must securely retain, use, and administer
its workshop card and PIN; workshop cards and PIN may not be
made available to third parties!
An accredited workshop must ensure secure communication
between the DTCO 1381 and workshop card!
Loss of the workshop card must be reported immediately to the
issuing authority / institution!
Obey the valid legal regulations in your country surrounding
workshop cards!
Obey the instructions of the issuing authority / institution and the
card manufacturer!
Please observe the following instructions about using the tacho-
graph cards:
•
Handle the tachograph cards carefully in order to avoid loss of
data.
•
Do not bend or fold the tachograph cards and do not use them
for anything other than their intended purpose.
•
Do not use damaged tachograph cards.
•
Keep all contact surfaces clean, dry, and free of grease and oil
(always use the protective cover).
•
Protect the card from direct sunlight (do not allow it to lie on the
instrument panel).
•
Do not place it in direct proximity to strong electromagnetic
fields.
•
Do not use the card beyond its period of validity. Apply for a new
card in a timely manner before expiry.
© Siemens VDO Automotive AG
Activation
Edition 07/2007
Advertisement
Chapters
Table of Contents
