Table of Contents
Advertisement
Operating the DTCO 1381
3.5
Preparing for data download
Edition 07/2007
2
3
4
Fig. 3 - 2:
Connection to the download interface
1. Insert workshop card, see chapter 3.4.1 "Inserting workshop
card", page 3-16.
2. Open the covering cap (1) to the right.
3. Insert data cable (3) into the download interface (2) and the
laptop (4).
4. Start the reading software.
For detailed information about the reading software, please refer to
the appropriate documentation.
For detailed information about a appropriate reading software,
please refer to a Siemens VDO sales office or the traffic Ministry.
5. After downloading the data, make sure you always close the
covering cap (1).
Technical Description DTCO 1381
3.5 Preparing for data download
1
3 - 21
Advertisement
Chapters
Table of Contents
