3.11 Assembly Group Frame
3.11.1 Frame size 1 and 2 (gas pressure spring or telescop)
(1) To widen the frame by 4 cm
•
we recommend to remove the centre
column.
•
Remove the driving wheels.
•
Remove at first only on one side the
screws (A) on the frame crossbar (B).
•
Remove on the same side the screws (C)
on the frame crossbar (D).
•
Pull the frame completely apart.
•
Place the included bushing between the
crossbar (B) and the middle piece (E).
•
Put the frame back together.
•
Replace the screws (A+C) and
•
retighten all the screws.
•
Proceed the same on the opposite side.
3.11.2 Frame size 3 and 4 (telescop)
Please proceed as described before
3.11.3 Frame size 3 and 4 (telescop)
(2) To widen the frame by 4 cm with tilting ad-
justment of the centre column with telescope
To widen the frame by 4 cm:
•
we recommend to remove the centre
column.
•
Remove the driving wheels.
•
Remove at first only on one side the 5
screws (A+B+C) on the frame crossbars
(D+E+F).
•
Pull the frame completely apart.
•
Place the included bushing between the
middle pieces (G+H) and the cross bars
(D+F) (see picture 3).
•
Replace the 5 screws (A+B+C) in the
new drilled holes and
•
retighten all screws.
•
Proceed the same on the opposite side.
28 of 36
(1)
(2)
(3)
Service Record Boogie Drive
(E)
(A)
(B)
(D)
(G) (H)
(F)
(E)
(D)
(A)
(C)
(C)
(B)
(A)
2019-07-16
Need help?
Do you have a question about the Boogie Drive and is the answer not in the manual?