Figure 5-6: Sim Gateway Module - ADT FOCUS 200 PLUS Installation And Setup Manual

FOCUS 200 PLUS Installation and Setup Guide
SIM Gateway Applications
The 472368 SIM Gateway is designed to be used with the following:
•
472366 Sensor Interface Module (SIM), used with Junction Box SCN 148320.
•
472367 SIM Door/Window contact.
•
472371 SIM Overhead Door contact.
•
472370 SIM Manual FA Pullbox.
•
472374 SIM Holdup Alarm Switch.
•
248309 SIM Relay Output Module kit and/or with Relay Module SCN 248026.
•
429CTAD SIM Smoke Detector.
•
472380 SIM Horn/Strobe.
•
472488 Supervised Horn/Strobe SIM.
•
450SIM, 633SIM, 690SIM Motion Sensors.
5-14
TAMPER SWITCH
OPERATOR
TAMPER SWITCH
GATEWAY
MICROPROCESSOR
TRANSMIT LED (YEL)
RS-485 BUS ADDRESS
DIP SWITCHES
NOTE: TRANSMIT LED FLASHES
WHEN GATEWAY IS TRANSMITTING.
RECEIVE LED FLASHES WHEN
GATEWAY IS RECEIVING.
DIP SWITCH POSITIONS SHOWN FOR COMMUNICATION GROUP 3
IN COMBINATION WITH UNIT NUMBERS 0 THROUGH 7.

Figure 5-6: SIM Gateway Module

TB2
TB1
1 (BLK) GND
2 (RED) +12V
E1
3 (YEL) COM
4 (BLU) COM +
RECEIVE LED (RED)
0
1
2
3
4
5
6
7
COMMUNICATION
UNIT
GROUP 3
NUMBER
GATEWAY TRUNK
TERMINAL STRIP
TERMINAL STRIP
CONNECTIONS TO
RS-485 BUS
JUMPER E1
(REMOVE JUMPER
TO DISCONNECT RS-485
TERMINATING RESISTOR)