Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ADT Safewatch
Summary of Contents for ADT Safewatch
-
Page 1: Security System
Safewatch QuickConnect Security System User Guide ARMED READY ESCAPE RECORD VOLUME PLAY AWAY TEST BYPASS STAY DELETE CODE CHIME STATUS FUNCTION SELECT 07001-001-V1 K14853V2 2/08 Rev. A Ref: LYNXR-ISIA... - Page 2 Your ADT security system is designed for use with devices manufactured or approved by ADT for use with your security system. Your ADT security system is not designed for use with any device that may be attached to your security system's keypad or other communicating bus if ADT has not approved such device for use with your security system.
-
Page 3: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS SYSTEM OVERVIEW ..........................5 Features ..............................5 General Operation ..........................7 Quick View of System Functions ......................9 About the Master Keypad ........................11 Master Keypad Definitions .........................12 About the Display and Indicators.......................15 SECURING THE PREMISES ........................15 Checking System Status ........................15 Arming the System..........................16... - Page 4 – 4 –...
-
Page 5: System Overview
Ask your installer which of these features has been assigned to key in your ADT Safewatch QuickConnect Security System. Refer Security System to the AUX FUNCTION section for detailed information. • Two-way voice: Allows the central station to listen, talk to or conduct two-way conversations with individuals on the premises Refer to the TWO-WAY VOICE section for detailed information. - Page 6 SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW Features False Alarm Prevention Many false alarms are caused by simple accidents, like forgetting to close a door when you leave. The LYNXR-ENSIA is equipped with several features that help prevent false alarms. Some of these features are optional or programmable.
-
Page 7: General Operation
SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW General Operation Zones Your system's sensing devices have been assigned to various "zones." For example, the sensing device on your entry/exit door may have been assigned to zone 01, sensing devices on windows in the master bedroom to zone 02, and so on. - Page 8 General Operation Two-Way Voice Feature The ADT Safewatch QuickConnect Security System supports voice dialog between an operator at the central station and an individual at the premises. This feature allows the central station to listen, talk to or conduct a two-way conversation with an individual(s) at the premises and allows the operator to gather information about the nature and location of the alarm that may be helpful in responding to police or rescue departments.
-
Page 9: Quick View Of System Functions
QUICK VIEW OF SYSTEM FUNCTIONS QUICK VIEW OF SYSTEM FUNCTIONS QUICK VIEW OF SYSTEM FUNCTIONS QUICK VIEW OF SYSTEM FUNCTIONS NOTE: = Boxes represent the entering of your 4-digit user code. SECURITY FUNCTIONS STATUS Checking system status: --------------- * + STAY To arm in STAY mode: ---------------- STAY (only if programmed and system armed in Stay mode) To restart exit delay: -------------------... - Page 10 QUICK VIEW OF SYSTEM FUNCTIONS QUICK VIEW OF SYSTEM FUNCTIONS QUICK VIEW OF SYSTEM FUNCTIONS QUICK VIEW OF SYSTEM FUNCTIONS REMOTE PHONE CONTROL OPERATION + [1] To remotely disarm: --------------------- + [2] To remotely arm in AWAY mode: - + [3] To remotely arm in STAY mode: -- + [6] + zone no.
-
Page 11: About The Master Keypad
SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW About the Master Keypad General IMPORTANT! If the keypad beeps rapidly upon entering the premises, an alarm has occurred during your absence and an intruder may still be on the premises. LEAVE IMMEDIATELY and CONTACT THE POLICE from a nearby safe location. -
Page 12: Master Keypad Definitions
STAY: Perimeter burglary zones, such as protected windows and doors, are armed. ADT Safewatch QuickConnect Security System is not intended for UL985 Household Fire U U U U L L L L applications unless a 24-hour backup battery (P/N LYNXRCHKIT-HC) is installed. - Page 13 SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW Master Keypad Definitions ARMED READY RECORD VOLUME PLAY ESCAPE " AWAY TEST BYPASS & STAY CODE CHIME DELETE STATUS FUNCTION SELECT 07001-003-V0 IMPORTANT! When you use the keypad to enter codes and commands, press the keys within 2 seconds of one another. If 2 seconds elapse without a key depression, the entry is aborted and must be repeated from its beginning.
- Page 14 SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW Master Keypad Definitions 13. STAY / DELETE KEY: Arms the perimeter 3. READY INDICATOR: When lit, indicates system is ready to be armed; blinking indicates burglary protection, guarding protected doors, system is not ready (a zone is open). Blinks once windows and other perimeter protection points, and per second when AVM (VOX or Talk) or speaker sounds an alarm if one is opened.
-
Page 15: About The Display And Indicators
SECURING THE PREMISES Checking System Status General Information Before arming your system, all protected doors, windows, and other protection zones must be closed or STATUS bypassed (see the BYPASSING PROTECTION section). Pressing the key will announce all zones that are faulted, as well as any other abnormal system condition, making it easier for you to secure any open zones. -
Page 16: Arming The System
SECURING THE PREMISES Arming the System NOTE: The control will provide a short confirmation ding when it has been armed using an RF Key Fob. Arming in Stay Mode Use this mode when you are staying home, but expect someone to use the entrance door later. Close all protected perimeter windows and doors before arming. -
Page 17: Quick Arming
SECURING THE PREMISES Arming the System Auto Stay Feature If this feature is enabled by installer, the system, when armed AWAY from the control keypad or a Wireless Keypad, switches to the STAY mode if the Exit Time expires and no one has exited the premises. -
Page 18: Entry/Exit Delays
SECURING THE PREMISES Entry/Exit Delays Exit Delay Exit delay begins immediately after arming the system, and gives you time to leave through the designated exit door without setting off an alarm. A slow beeping will sound throughout the exit delay period, if programmed. -
Page 19: Disarming The System
SECURING THE PREMISES Disarming the System NOTE: The control will provide a long confirmation ding when it is disarmed using an RF Key Fob. Use the key to disarm the system and to silence alarm and trouble sounds. See the SUMMARY OF AUDIBLE NOTIFICATION section for information, which will help you to distinguish between fire and burglary alarm sounds. -
Page 20: Bypassing Protection Zones
SECURING THE PREMISES Bypassing Protection Zones Bypassing Individual Zones Use the BYPASS key when you want to arm your system with one or more zones intentionally unprotected. Bypassed zones are unprotected and will not cause an alarm when violated while your system is armed. -
Page 21: Panic Keys / Chime Mode
SECURING THE PREMISES Panic Keys / Chime Mode Panic Keys Your system may have been programmed to use special keys to manually activate panic functions. The functions that might be programmed are listed below. See your installer for the function(s) that may have been programmed for your system. -
Page 22: User Functions
USER FUNCTIONS Message Recording/Playback/Volume Control ADT Safewatch QuickConnect Security System Message Center allows you to record, play and delete messages. The maximum message duration is 85 seconds. NOTES: (1) The Record/playback functions can only be performed from the master keypad. It cannot be performed from any other wireless keypad (ex. -
Page 23: Adjusting The Volume
USER FUNCTIONS Message Recording/Playback/Volume Control Adjusting the Volume The volume level of message playback, system announcements, and status beeps can be changed. You can also mute system announcements if desired. To adjust message playback/system announcement volume: † FUNCTION + VOLUME + [3] or [6] †... -
Page 24: Aux Function
USER FUNCTIONS AUX Function General Information The AUX key may have been programmed to either perform a predefined function. Ask your installer which function has been assigned for your system. PRE-DEFINED FUNCTION Key: If programmed for the AUX function, you can use the key to activate a string of up to 20 keystrokes that have been stored in the system’s memory. -
Page 25: Clock/Calendar
USER FUNCTIONS Clock/Calendar Your system can display the current time (see your installer). The date is not displayed, but has an internal function. The system must be disarmed. + FUNCTION + [63] To set the time and date: Master user code or Installer Code The system will enter the Voice Prompt Calendar Setting mode. - Page 26 USER FUNCTIONS Clock/Calendar The system will announce, “Enter two-digit day press ADD to accept, ESCAPE to quit”. 01 (The current day of the month will display.) Enter the 2-digit day of the month (i.e., 01-31). Press [ADD] to accept the entry and continue to the year setting. Press [ESCAPE] to back up to Month selection.
-
Page 27: Remote Phone Control Feature
Remote Phone Control Feature QuickConnect The ADT Safewatch Security System is equipped with a remote interactive phone capability that permits access to the security system from any off-site touch-tone telephone using all user codes. If this feature has been programmed, the system will provide the appropriate voice messages and any system beeping sounds indicating the status of the security system over the phone line. - Page 28 Remote Phone Control Feature (within eight seconds) Enter: Your user code QuickConnect Upon entering remote phone control mode the ADT Safewatch Security System will announce “System, enter code”. Remote Phone Control Commands + [1] To remotely disarm system: Your user code...
-
Page 29: Speaker Phone Feature
Do not use the speaker phone as the only telephone in your home since in some special cases the speaker phone is not functional. The system will not enter speaker phone mode and ADT Safewatch QuickConnect will not ring if: •... - Page 30 No ring will confirm that the ringer is disabled. (2) The speaker phone ringer will not ring when an alarm, trouble or entry/exit delay are sounding. (3) The ADT Safewatch QuickConnect Security System speaker phone does not provide a “hold” feature.
-
Page 31: Remote Services
USER FUNCTIONS Remote Services Your security system may be capable of providing a series of web-based services that allow you to communicate with your security system remotely in a number of ways. These services provide the ability to: • Access to your security system from a computer via website (Remote Access Feature) •... -
Page 32: Fire Alarm System
(If Installed) General Information U U U U L L L L ADT Safewatch QuickConnect Security System is not intended for UL985 Household Fire applications unless a 24-hour backup battery (P/N LYNXRCHKIT-HC) is installed. General Your fire alarm system (if installed) is active 24 hours a day, providing continuous protection. In the event of an emergency, the installed smoke and heat detectors will automatically activate your security system, triggering a loud, intermittent sound from the keypad. -
Page 33: National Fire Protection Association's Smoke Detector Recommendations
Smoke Detector Recommendations U U U U L L L L ADT Safewatch QuickConnect Security System is not intended for UL985 Household Fire applications unless a 24-hour backup battery (P/N LYNXRCHKIT-HC) is installed. With regard to the number and placement of smoke and heat detectors, we subscribe to the recommendations contained in the National Fire Protection Association's (NFPA) Standard #72 noted below. -
Page 34: Emergency Evacuation
Emergency Evacuation U U U U L L L L ADT Safewatch QuickConnect Security System is not intended for UL985 Household Fire applications unless a 24-hour backup battery (P/N LYNXRCHKIT-HC) is installed. Establish and regularly practice a plan of escape in the event of fire. The following steps are... -
Page 35: System Functions
SYSTEM SYSTEM FUNCTIONS FUNCTIONS SYSTEM SYSTEM FUNCTIONS FUNCTIONS Security Codes General Information For additional security you (the Master User Code) can assign secondary user codes to individual users enabling them to perform specific system functions. These secondary users are identified by "user numbers"... -
Page 36: Testing The System
SYSTEM FUNCTIONS SYSTEM FUNCTIONS SYSTEM FUNCTIONS SYSTEM FUNCTIONS Testing the System (to be conducted weekly) Entering Test Mode TEST key puts your system into the Test mode, which allows each protection point to be checked for proper operation. The keypad sounds a single beep every 45 seconds as a reminder that the system is in the Test mode. -
Page 37: Trouble Messages
LOW BAT Accompanied by a once-per 45 seconds beeping at the keypad, indicates a low system ADT Safewatch QuickConnect battery condition exists. Refer to the Changing the (no zone no.) Security System Battery section. †... -
Page 38: Maintaining Your System
It is your responsibility to make sure that your system is in good working order. It's easy to test your system; just refer to your owner handbook or call 1-888-238-7374 and follow the simple instructions. If you find that a part of your system is not working properly, call ADT at 1-888-238-7374 to request repair service. -
Page 39: Summary Of Audible Notification
Summary of Audible Notification Summary of Audible Notification Summary of Audible Notification Summary of Audible Notification *UPPER CASE indicates announcements after pressing STATUS once. Lower case indicates announcements after pressing STATUS twice. SOUND CAUSE DISPLAY ANNOUNCEMENT* INTERRUPTED FIRE ALARM FIRE ALARM is displayed; zone fire alarm + zone voice Speaker and number in alarm displayed. - Page 40 Summary of Audible Notification Summary of Audible Notification Summary of Audible Notification Summary of Audible Notification Additional Announcements: Pressing STATUS key once will announce the following primary messages, depending on the system’s status at the time: Disarmed–Ready to Arm [check system] Disarmed [not ready to arm] Armed [away] [stay] [check system] [exit now] Pressing the STATUS key twice will announce the following secondary messages, depending...
-
Page 41: Fcc Statements
FCC AND INDUSTRY CANADA STATEMENT THIS DEVICE COMPLIES WITH PART 15 OF FCC RULES AND RSS210 OF INDUSTRY CANADA. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. - Page 42 Federal Communications Commission (FCC) Part 68 This equipment complies with Part 68 of the FCC rules and the requirements adopted by ACTA. On the front cover of this equipment is a label that contains the FCC registration number and Ringer Equivalence Number (REN).
-
Page 43: In The Event Of Telephone Operational Problems
IN THE EVENT OF TELEPHONE OPERATIONAL PROBLEMS In the event of telephone operational problems, disconnect the control by removing the plug from the RJ31X (CA38A in Canada) telephone wall jack. We recommend that your certified installer demonstrate disconnecting the phones on installation of the system. Do not disconnect the phone connection inside the control/communicator. - Page 44 – 44 –...
-
Page 45: Servicing Information
SERVICING INFORMATION Your local ADT Installer is the person best qualified to service your alarm system. Arranging some kind of regular service program with him is advisable. Your local ADT Installer is: Name: Address: Phone: – 45 –... -
Page 46: Limitations Of This Alarm System
WARNING! THE LIMITATIONS OF THIS ALARM SYSTEM While this system is an advanced design security system, it does not offer guaranteed protection against burglary or fire or other emergency. Any alarm system, whether commercial or residential, is subject to compromise or failure to warn for a variety of reasons. -
Page 47: Owner's Insurance Premium Credit Request
OWNER'S INSURANCE PREMIUM CREDIT REQUEST This form should be completed and forwarded to your homeowner's insurance carrier for possible premium credit. A. GENERAL INFORMATION: Insured's Name and Address: Insurance Company: Policy No.: ADT Safewatch QuickConnect Security System ___________________ Other Type of Alarm:... - Page 48 OWNER'S INSURANCE PREMIUM CREDIT REQUEST (cont.) E. SMOKE DETECTOR LOCATIONS Furnace Room Kitchen Bedrooms Attic Basement Living Room Dining Room Hall F. BURGLARY DETECTING DEVICE LOCATIONS: Front Door Basement Door Rear Door All Exterior Doors 1st Floor Windows All Windows Interior Locations All Accessible Openings, Including Skylights, Air Conditioners and Vents G.
- Page 49 – – – – NOTES NOTES – – – – NOTES NOTES – 49 –...
- Page 50 – – – – NOTES NOTES – – – – NOTES NOTES – 50 –...
-
Page 51: Index
INDEX AC ..............12 Fault ............12, 37 Adjusting the volume ........23 Fault 103 ............37 Alarm..............12 FC ..............37 Alarm monitoring company ......21 FCC statement ..........41 Alarms ..............7 Features ............5, 6 Armed indicator ..........13 Fire ..............12 Audible emergency/audible alarm ....21 Fire alarm system.......... - Page 52 Ready indicator...........14, 19 Test ..............12 Ready LED ............20 Test mode ...........10, 36 Ready light ............15 Time and date ..........10 Real-time clock ...........5 Trouble messages ........... 37 Rec..............12 Two-way voice ..........5, 8 Rechargeable, nickel-metal hydride battery pack ..............38 Record ..............14 User code.............
-
Page 53: One Year Warranty
Monday through Friday, except holidays. Services rendered outside the normal working hours of ADT are not within the scope of this warranty and any services requested to be performed at such times shall be charged for at ADT's then applicable rates for labor and material. - Page 54 B. Customer understands that the installation will necessitate drilling into various parts of the premises: ADT intends, generally, to conceal wiring in the finished areas of the premises; however, there may be areas which, due to construction, decoration, or furnishing of the premises, ADT determines, in its sole discretion, that it would be impractical to conceal wiring and, in such cases, wiring will be exposed.
- Page 55 – – – – NOTES NOTES – – – – NOTES NOTES...
- Page 56 ADT and SAFEWATCH are registered trademarks of ADT Services AG and are used under license. ADT Security Services, Inc. One Town Center Road Boca Raton, FL 33486 Copyright © 2008 ÊK14853V2PŠ K14853V2 2/08 Rev. A...
Need help?
Do you have a question about the Safewatch and is the answer not in the manual?
Questions and answers