ADT Focus 200 Plus User Manual
  1. Manuals
  2. Brands
  3. ADT Manuals
  4. Security System
  5. Commercial Fire & Burglary Alarm System FOCUS 200...
  6. User manual
ADT Focus 200 Plus User Manual

ADT Focus 200 Plus User Manual

Adt focus 200 plus commercial fire and burglary alarm system user guide
Hide thumbs Also See for Focus 200 Plus:
Table of Contents

Advertisement

Quick Links

S
S
K3693-1SIA 1/07
e
c
u
r
i
e
c
u
r
Commercial Fire & Burglary
F200PA
REV 4.4
t
y
S
y
i
t
y
S
y
User Guide
FOCUS 200 PLUS
Alarm System
s
t
e
m
s
t
e
m

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Focus 200 Plus and is the answer not in the manual?

Questions and answers

Related Manuals for ADT Focus 200 Plus

Summary of Contents for ADT Focus 200 Plus

  • Page 1 Commercial Fire & Burglary K3693-1SIA 1/07 FOCUS 200 PLUS Alarm System F200PA REV 4.4 User Guide...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS SYSTEM OVERVIEW ...3 ...3 NTRODUCTION FOCUS 200 PLUS F EATURES ...4 ONTROL ...4 PERATING ANEL ROTECTION OINTS AND CCESS AND ECURITY UTOMATED VENT ECORDING AND ...6 RINTING ...6 UMMARY FALSE ALARM PREVENTION ...7 ...7 NTRODUCTION QUICK START...11 ...11 NTRODUCTION PERATING...

  • Page 3: System Overview

    Introduction The ADT FOCUS 200 PLUS is a user-friendly security system that monitors your site’s detectors and alarms. Fully programmable, the FOCUS 200 PLUS allows you to control hundreds of critical security functions from one menu-driven interface as simple to use as the automated teller machine (ATM) at your local bank.

  • Page 4: Control Unit

    System Overview (cont’d) • Capacity of up to 255 individual operating panel users, each having various security privileges. • Capacity of up to 999 individual card/key reader users, each having various levels of access. • Control and recording of employee access to workplace areas along with time and date.

  • Page 5: Protection Points And Groups

    Protection Points and Groups The FOCUS 200 PLUS monitors up to 255 protection points in up to eight independent fire and burglary groups. The system lets you designate group names in ways that make sense for your specific needs. For example, “Office” and “Warehouse”...

  • Page 6: Automated Event Recording And Printing

    System Overview (cont’d) Automated Event Recording and Printing The ADT FOCUS 200 PLUS provides complete documentation and event- recording capabilities. The system prints all desired events and stores the last 1000 system events in memory. The types of events recorded in the memory are: •...

  • Page 7: False Alarm Prevention

    Introduction In recent years the pace of electronic development of security systems has greatly accelerated. This has brought the price range of reliable monitored security systems to a level that is affordable to most households and nearly all businesses. As a result, the number of security systems installed is expanding swiftly.
  • Page 8 False Alarm Prevention (cont’d) Statistics verify that more than 75% of all false alarms are caused by alarm system operators Of these, at least 7 out of 10 are simple errors made by a user while turning the system on or off or when leaving or entering the building. Other typical causes are: •...
  • Page 9 Additional steps are to carefully read and understand this manual, to become thoroughly familiar with your system by practicing entry and exit commands, and to learn how your monitoring system can become part of your workday lifestyle. Learn your Personal Identification Number (PIN), which is necessary when you communicate with your ADT Customer Monitoring Center.
  • Page 10 False Alarm Prevention (cont’d) 5. If You Fumigate Your Building: The chemical fog used in the fumigation process may be sensed as smoke by fire alarm smoke detectors and may also adversely affect area sensors. Therefore, be sure to notify ADT BEFORE starting. 6.

  • Page 11: Quick Start

    Introduction The QUICK START section is designed to familiarize new users with the operation of the FOCUS 200 PLUS operating panel in under an hour. It will introduce you the FOCUS 200 PLUS’ four primary menus and guide you through the logic behind one or two operations from each menu. Think of the QUICK START section as a “crash course”...

  • Page 12: Normal Inactive Screen

    Quick Start (cont’d) Normal Inactive Screen When there are no alarms or troubles and no one is using the operating panel, the Normal Inactive Screen will display: • Press the ? to view the Help Screen, which will aid you in responding to an alarm or trouble condition.

  • Page 13: Responding To Alarms

    Responding to Alarms During an alarm, your system’s alarm annunciating devices (bell, siren, lights, and/or operating panel, depending on the optional devices you selected) will be activated. The operating panel and horns will sound an intermittent tone (with a 5-second pause every 10 seconds) to audibly annunciate a fire alarm and a steady tone to audibly annunciate a burglary alarm.

  • Page 14: Entering Your Personal Id Number

    Quick Start (cont’d) To view current alarms, perform the following steps: Using the operating panel’s numeric keypad, enter a valid ID code to display the Action Menu 1 (see page 19) if no burglary groups are on; or press the “Turn off” selector button (if burglary groups are on) to deactivate all annunciating devices.

  • Page 15: The Navigational Menu

    EXERCISE: PANEL ACTIVATION/DEACTIVATION Enter your ID code. Count to 15 after you hear the long beep. The operating panel should now become inactive. Enter your ID code again. As soon as you hear the long beep, press the More selection once.
  • Page 16 Quick Start (cont’d) EXERCISE: THE MORE/FIRST SELECTION Enter your ID code and press the More selection three times. You are now at the last Action Menu screen, and the More selection on the screen has changed to First. Choosing First will now bring you back to the first Action Menu screen.

  • Page 17: Turning Ba Group Off

    Quick Start (cont’d) Summary: Navigational Selections Every Action Menu screen contains two navigational selections, More/First and Quit/Previous. More/First allows you to scroll forward among the four Action Menus, while Quit/Previous brings you to the previous menu screen (from screen 2-4) or inactivates the operating panel (from screen 1). If you are not completely comfortable with the navigational selections, go back and repeat the exercises before continuing.

  • Page 18: Action Menu 1-4 – Main Feature

    Quick Start (cont’d) Action Menus 1-4 – Main Features Now that you are familiar with the navigational and help features common to all FOCUS 200 PLUS menus, it’s time to take a closer look at what distinguishes one menu from another. To perform all the exercises here, your ID code will need to have access to all levels of operation.
  • Page 19 EXERCISE: THE “?” SELECTION Scroll through the four Action Menus using the two navigational keys discussed earlier. At each screen, choose the ? selection to familiarize yourself with the various Help Screens. Take a look at Action Menu 1. You now know that this menu contains two navigational selections and a help selection.

  • Page 20: Action Menu

    Quick Start (cont’d) EXERCISE: TURN ON BURGLARY PROTECTION Enter your ID code and observe Action Menu 1. Press Turn on. Choosing this enables you to turn the group(s) on in either the AWAY or STAY mode. Once you select the mode, you can scroll through your burglary groups using the Previous and Next selections.
  • Page 21 The test function is used for testing points, groups, and alarm functions of your security system. To explore this function, enter your ID code and enter Action Menu 2 by pressing More at Action Menu 1. Press Test to go to the Test Submenu. Press More to display Test Submenu 2.
  • Page 22 Quick Start (cont’d) EXERCISE: BYPASS/UNBYPASS PROTECTION POINTS Enter your ID code and press More twice to display Action Menu 3. Choosing Bypass leads you to the Bypass selection menu. (You must have a Bypass BA privilege. If not, you will not see Bypass). Selecting Burglar will bring you to the Group Selection menu for the BA groups.
  • Page 23 Action Menu 4 SysInfo Name pnt/gps Previous Action Menu 4 contains four feature selections: • SysInfo – Displays model number, revision, and date of your FOCUS 200 PLUS system. • Name pnt/gps – Displays or changes the name, number, and type of each protection point or group.
  • Page 24 Quick Start (cont’d) The first line of the screen displays the current name with the cursor on the first letter of the description. Use the POS (Cursor Position) keys to move the cursor to the right and left through the description. Use the CHR (Character) keys to scroll forward and backward through the character list (letters, numbers, symbols, and spaces).

  • Page 25: Summary

    Quick Start (cont’d) Summary After reading through the Quick Start section and going through the exercises, you should be familiar with the operating panel of the FOCUS 200 PLUS security system. If you are uncertain of any operation, return to that part of this section and repeat the exercise.

  • Page 26: Operating Panel

    System Operation Overview Operating Panel Your FOCUS 200 PLUS security system is controlled through interactive operating panels consisting of a numeric keypad for entering data; a four- line, 17-character (per line) display; and 8 selector buttons for choosing operating functions. Help Button Display Screen Your “key”...
  • Page 27 System Operation Overview (cont’d) As selector buttons are pressed, the operating panel will display system status, selection menus, prompts, and help screens to guide the user through the various operational capabilities assigned to that user. The messages displayed on the operating panel can be customized by programming unique descriptions for the name of each protective point, group of protective points, holiday, and users.

  • Page 28: Action Menus

    System Operation Overview (cont’d) Action Menus Upon the entry of a valid ID code, the operating panel will display the first of four Action Menu screens. These menus are the starting point for all operating functions that can be accessed (except turning off the system). To choose a displayed function, simply press the corresponding selector button.
  • Page 29 System Operation Overview (cont’d) See points Displays the number description and current status of each protection point. Change close time Changes the close time (system on) of a protection group(s). Previous or Prev Returns to the previous display. Test Tests protection groups, points, holdup devices, and/or bell and operating panel display.
  • Page 30 System Operation Overview (cont’d) Bypass Bypasses (ignores) or unbypasses (restores to normal operation) protection points, displays the number of points within each group that can be bypassed, or bypasses Vault Vibration Sensor (VVS) points. Checks AC power, standby battery power, and the telephone Status line.
  • Page 31 System Operation Overview (cont’d) Displays the model number, revision, and date of your SysInfo FOCUS 200 PLUS security system. Name pnt/gps Displays or changes the name, number, and type of each protection point and group. ID codes Displays or changes user or group access names, access privileges, user card/key numbers, the user ID code of the first 255 persons, and cancel dates.

  • Page 32: System Programming

    System Programming Introduction Your FOCUS 200 PLUS security system is easily customized to meet your specific security and monitoring requirements. During installation, your ADT representative will review all system options and will recommend certain features and functions to accommodate your facility and daily business routines.

  • Page 33: Entering Or Changing A User Name

    Once an ID code is assigned to a user, that user may automatically perform the following functions: • Turn on/off assigned Burglary Protection. • Test system sounders. • Test burglary points. • View/print the system’s history log. Each code may also be assigned a specific “Privilege Level(s)” that provides access to additional system operating functions (see Assigning Privilege Levels later in this section).
  • Page 34 System Programming (cont’d) 4. Press Prev or Next to display the specific user name and user number to be changed or added. Hint: To go directly to the user, enter one-to three-digit user number on the numeric keypad. 5. Press Change to display the Character Entry Screen to change the user name.

  • Page 35: User Xxx

    • Spaces are entered by pressing the 1 key. • Symbols are entered by pressing the 1 key, then using the CHR (backward and forward) keys to scroll through the entire character set. Hint: Scrolling through the entire alphabet will take less time if you hold the keys down instead of pressing and releasing them.
  • Page 36 System Programming (cont’d) 5. Press Delete to delete the User Name, ID code, Burglary group access, privilege levels, card/key code, and cancel date. Note: If Delete is not displayed, contact ADT for removal of this user from the system. 6. Press Continue to display the User Selection Menu again. To delete other users, repeat steps 4 through 6.
  • Page 37 6. Press Continue to display the first Burglary (BA) group description. This screen also shows the user’s access privilege for the BA group displayed ("Can access & open," "Can access," "Can access irr & open," or "Can not access"). Refer to Table 1: Access Capability later in this section. Assigning Burglary Group Access 7.
  • Page 38 System Programming (cont’d) • Bypass BA – Bypass and unbypass all assigned burglary points. • Change temp sched – Change temporary daily schedules, closing times, and limited time changes. • Change perm sched – Change permanent daily schedules, earliest open times, latest closing times, date, and unlimited time changes.
  • Page 39 Access Time Capability Person can open Inside or and access any Outside time. Schedule Same as above, Inside but an irregular Schedule event will be flagged for access outside Outside of schedule Schedule (PVF). Person can open Inside and access, but Schedule only within schedule.
  • Page 40 System Programming (cont’d) Assigning a User ID Code The ID code is used to access the operating panel. The first two digits of the ID code are the user number. The number to be entered is the unique four- digit PIN. Choose a number that is easy to remember, but is still difficult for others to guess.

  • Page 41: Hanging The Time And Date

    Changing the Time and Date Your FOCUS 200 PLUS security system contains a real-time clock and calendar, which must be programmed at the time of installation. Periodically check the clock and calendar to ensure their accuracy. The time and date may require re-entering if both AC power and battery power have been interrupted or disconnected.
  • Page 42 System Programming (cont’d) 6. Press Change time to display the time currently set in the system. 7. Using the operating panel’s numeric keypad, enter the new time. Note: Those users who have been assigned only the privilege level of “Change temp sched” are limited to time changes within 5 minutes of the current time displayed on the screen.

  • Page 43: Daily Operating Schedules

    4. Press Daylight to display “Spring Daylight” description and programmed date. 5. Press Previous or Next to toggle between “Spring Daylight” description and “Fall Daylight” description and the date you want to change. 6. Press Change to display the selector buttons for entering a new spring or fall description.
  • Page 44 System Programming (cont’d) Schedules can be permanent or temporary. A permanent schedule is fixed, and remains in effect until it is changed (by an authorized user). A temporary schedule will override the permanent schedule for one day only. It is automatically deleted at midnight of the day it took effect. For example, on a Friday, a temporary closing time of 8:00 PM is programmed into the system to override the permanent schedule closing time of 5:00 PM.
  • Page 45 6. Press the Group Description button to display the selector buttons "Daily schedules" and "Schedule limits." 7. Press Daily schedules to display the selector buttons "Permanent" and "Temporary." 8. Press Permanent or Temporary to display the current permanent or temporary open/close schedule. Hint: The system will start display with “today”...
  • Page 46 System Programming (cont’d) Guidelines (continued): • Pressing Delete when changing a closing time will tell the system that no closing will occur for that schedule that day (up to midnight). Use this to tell the system when there is an early morning closing the next day. You must also program a 12:00 AM opening and a closing time (i.e., 3:00 AM) the next day.
  • Page 47 For maximum security, the Auto On/Off feature is not recommended. If Auto Off is enabled, burglary protection will automatically be turned off regardless of unforeseen events, possibly allowing unauthorized personnel to enter the premises. If Auto On is enabled, burglary protection will automatically be turned on, which could lead to the generation of a false alarm if personnel are within a protected area.
  • Page 48 System Programming (cont’d) Changing Open/Close Schedule Limits Use the procedure below to change the earliest open times and the latest close times for the system. 1. Using the operating panel’s numeric keypad, enter a valid ID code that has been assigned the privilege level of "Can change perm sched." 2.

  • Page 49: Oliday Description And Dates

    11. Press AM or PM to complete the entry and to display the new schedule limits. 12. Press Change to re-enter an earliest open or latest close time, or press Quit to display other schedule options. Holiday Description and Dates Your FOCUS...
  • Page 50 System Programming (cont’d) 4. Press Holiday to display holiday descriptions and dates. 5. Press Previous or Next to display the holiday description and date you want to change, or to display an unassigned holiday description and date. 6. Press Change to display the selector buttons for entering the new holiday description.

  • Page 51: Group/Point Descriptions

    Changing Holiday Dates Complete steps 1 through 6 from Adding or Changing Holiday Descriptions. 7. Press Continue to display the current and new Holiday dates. 8. Using the operating panel’s numeric keypad, enter the new date. Example: January 1 is entered as 0101. 9.
  • Page 52 System Programming (cont’d) 6. Use the POS (Cursor Position) keys to move the cursor to the right and left through the description. Use the CHR (Character) keys to scroll forward and backward through the character list (letters, numbers, symbols, and spaces). Similarly, you may change characters directly by using the alphanumeric keypad, which is organized like the TouchTone dial on a telephone.

  • Page 53: System Operation

    System Operation Your FOCUS 200 PLUS security system is controlled through operating panels conveniently located throughout your facility. See SYSTEM OPERATION OVERVIEW section for detailed operating instructions and a description of the operating panel. Turning On Burglary Protection Turning on burglary protection will probably be the most used (and most important) operation for most sites.
  • Page 54 System Operation (cont’d) 2. Press Turn on to display Arming Mode screen (if STAY mode is enabled). 3. Select which arming mode (AWAY or STAY). 4. Press All to turn on all Burglary groups. 5. Secure and exit premises prior to the expiration of the exit delay (if applicable).

  • Page 55: Turning Off Burglary Protection

    5. Press the “Group description” button to turn on that specific group. 6. Press Continue to display Action Menu 1. 7. Repeat steps 2 through 5 to turn on additional groups. 8. If an outside sounder is installed and optioned, wait to hear a short “ding”...

  • Page 56: Turn Off Menu

    System Operation (cont’d) Turning Off ALL Burglary Groups Note: All Burglary groups in alarm or entry delay will be automatically turned off when a valid ID code is entered. All other Burglary groups must be turned off manually. 1. Using the operating panel’s numeric keypad, enter a valid ID code to display the Turn Off Menu.
  • Page 57 3. Press Previous or Next to display the specific Burglary group to be turned off. 4. Press the “Group description” button to turn off that specific group. 5. Repeat steps 2 through 4 to turn off additional groups. 6. Press Continue to display Action Menu 1. Turning Off One or More Burglary Groups Using a Key or Card Reader 1.

  • Page 58: Urning O N Burglary Protection

    3. Press Reset to display the reset choices. System Operation (cont’d) 4. Press Alarms to reset all points to which you have access. The display will indicate if all points have or have not been reset. 5. If all points have not been reset, press See points to display those points that have not been reset.

  • Page 59: History Selection Menu

    3. Press History to display the History Selection Menu. History Selection Menu 4. Press On this screen to display the last 1000 system events (in chronological order, beginning with the most recent event). The events are displayed by date, time, and type. 5.

  • Page 60: History Log Alpha And Event Codes

    8. Press Stop print to stop the printing of the history log; or press Continue to display Action Menu 3. System Operation (cont’d) History Log Alpha and Event Codes System Reset Reset Memory AC Fail AC Restore AC Fail 4-Hour AC Fail 4-Hour Restore Telco Line Cut (built-in dialer) Telco Line Cut Restore (built-in dialer)
  • Page 61 Description Expansion Module (continued) Cardreader Trouble Restore Point Gateway Tamper Alarm Point Gateway Trouble - Supervision Point Gateway Trouble Restore Printer Tamper Alarm Printer Trouble – Supervision Printer Trouble Restore RF Low Battery Downloading DLL Aborted Start DLL DLL Interrupted End DLL Altered DLL Comm Fail End DLL Not Altered...
  • Page 62 BA Opening System Operation (cont’d) Open/Close (continued) BA No Close – Scheduled close time expired BA Exit Fail – exit error (user) BA Bypass Closing by User BA STAY (Local) Arming Fire Alarm Fire Trouble Fire Alarm Restore Fire Alarm Silence Fire Point Bypass Fire Alarm Point Unbypass Supervisory Alarm...
  • Page 63 Description Medical Alarm Medical Alarm Restore Description Panic (continued) Medical Trouble Medical Bypass Medical Unbypass Scheduling BA Change Close Time (extend closing) BA Change Open Time Change Close Time Change Auto-On Level Change Latest Close – sent only if closing schedule is altered Change Open Time –...
  • Page 64 ADT Off-Premises Tamper Alarm Tamper Restore System Operation (cont’d) Other (continued) Tamper Bypass Tamper Unbypass VVS Bypass VVS Unbypass (after 12 AM auto-off) Bypass by User Keypad Active Audible Walk-Test Change Code Change Early Open Change Holiday Carbon Monoxide Alarm Carbon Monoxide Bypass Carbon Monoxide Restore Carbon Monoxide Trouble...
  • Page 65 Description Communication Fault Restore Access 2-Man 2 Person Keypad Lockout Description Access (continued) Cardreader Irregular Access Manual Pushbutton Access – remote arm/disarm opening Access Denied Code Known – access denied Access Denied Code Unknown – access denied System Test Walk-Test Bell Test Holdup Test Alarm Holdup Test Restore...

  • Page 66: Bypassing/Unbypassing Burglary Protection

    Holdup Suspicion Print Keypad No Access Untyped Bypass Untyped Unbypass Burglary Alarm Diagnostics Fire Alarm Diagnostics System Operation (cont’d) System Test (continued) Output Trouble Output Trouble Restore Point Trouble Point Alarm – general alarm Point Alarm Restore – general alarm restore Untyped Diagnostics Burglary Alarm Weak Battery Fire Alarm Weak Battery...
  • Page 67 Bypassing Protection Points Note: A bypassed point cannot detect intrusion or an alarm condition. Before resorting to bypassing a point, attempt to repair or correct the problem. 1. Using the operating panel’s numeric keypad, enter a valid ID code that has been assigned the privilege level of "Can bypass BA."...
  • Page 68 6. Press the Group description button to display Bypass Selection Menu 2. 7. Press Bypass points to display the point number, status, description, and additional selector buttons. 8. Press Prev or Next to display the specific point to be bypassed. System Operation (cont’d) Bypass Selection Menu 2 9.

  • Page 69: Xtending Close Time

    Vault vibration sensors are sophisticated electronic sensors that are sensitive to occupant and construction vibrations. If construction is scheduled to end by the programmed "Latest Close Time," use the Bypass VVS feature to automatically bypass ALL VVS detectors. ALL VVS detectors will be automatically unbypassed after 12 midnight.

  • Page 70: Ending Messages To A

    System Operation (cont’d) Sending Messages to a Pager The FOCUS 200 PLUS system can transmit messages to up to 8 paging services (typically one for each group). The types of messages are divided into 4 categories: System Troubles, Point Troubles, Alarms and Open/Closes.

  • Page 71: Udible )

    To ensure proper operation of your FOCUS 200 PLUS security system, it is recommended that you periodically test all devices within your system. You can print, display, or audibly annunciate all system tests. Before testing protection groups and/or points, turn off the group(s) containing the points to be tested.

  • Page 72: Rotection Points (Visual )

    System Test (cont’d) Protection Points (Visual) 1. Using the operating panel’s numeric keypad, enter a valid ID code to display Action Menu 1. Turn off those groups to be tested. 2. Press More to display Action Menu 2. 3. Press Test to display Test Menu 1. 4.

  • Page 73: Rotection Groups

    Protection Groups Use this test to determine if the selected Burglary group is ready to turn on. 1. Using the operating panel’s numeric keypad, enter a valid ID code to display Action Menu 1. 2. Press More to display Action Menu 2. 3.

  • Page 74: B Ell And O Perating P Anel D Isplay

    System Test (cont’d) 7. Press Start test to begin the test. 8. Activate each Holdup, Fire, or Supervisory device. You will hear a beep once per minute as a reminder that the system is in the test mode. A history event will be logged for each sensor activated. 9.

  • Page 75: Troubleshooting Guide

    During operation of your FOCUS 200 PLUS security system, your operating panel may display error or trouble messages, which restrict system operation. To display additional information regarding trouble or error messages, press the "Help" selector button “?”. The chart below also provides a list of these messages, a brief explanation and the required action to resolve the problem.
  • Page 76 Troubleshooting Guide (cont’d) Trouble or Error Display ADT Service personnel working on system. System has telephone line problem. Cannot turn on! Communication line trouble. Time to turn on ‘Group Description’ or extend closing time. Cannot turn on! ‘Group Description’ must be on first. Cannot turn off ‘Group Description’...
  • Page 77 Trouble or Error Display Fire, SPV or Holdup points bypassed. Cannot turn on! System must be reset by ADT. Code incorrect. Code incorrect. Keyboard locked. Please wait. Cannot turn on! Some points are abnormal. Too many points bypassed. Troubleshooting Guide (cont’d) Description Action •...

  • Page 78: Fire Alarm Application Note

    So for example, the AHJ will review a fire alarm design for the correct number of smoke detectors and their placement in relation to the structure’s layout. ADT’s FOCUS 200 Plus Fire Alarm System Capabilities The FOCUS CADET security system is Underwriters Laboratories listed for, and can support, addressable smoke and fire detection, as well as provide fire alarm warning to your premise’s occupants.

  • Page 79: Emergency Evacuation

    Establish and regularly practice a plan of escape in the event of fire. The following steps are recommended by the National Fire Protection Association: 1. Position your detector or your interior and/or exterior sounders so that they can be heard by all occupants. 2.
  • Page 80 FEDERAL COMMUNICATIONS COMMISSION (FCC) PART 15 STATEMENT NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 81 NOTIFICATION All connections to the telephone network must be made through standard plugs and standard telephone company jacks, or equivalent, in such manner as to allow for easy and immediate disconnection of the alarm equipment. If the connecting cord is unplugged from the jack there shall be no interference to the telephone equipment still connected to the telephone network.
  • Page 82 FEDERAL COMMUNICATIONS COMMISSION (FCC) PART 68 NOTICE This equipment complies with Part 68 of the FCC rules. On the front cover of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment.
  • Page 83 CANADIAN DEPARTMENT OF COMMUNICATIONS (DOC) STATEMENT This Class B digital apparatus complies with Canadian ICES-003 NOTICE The Industry Canada Label identifies certified equipment. This certification means equipment meets telecommunications protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s).
  • Page 84 THE LIMITATIONS OF THIS ALARM SYSTEM While this system is an advanced design security system, it does not offer guaranteed protection against burglary or fire or other emergency. Any alarm system, whether commercial or residential, is subject to compromise or failure to warn for a variety of reasons. For example: •...
  • Page 85 THE LIMITATIONS OF THIS ALARM SYSTEM • Alarm warning devices such as sirens, bells, or horns may not alert people or wake up sleepers if they are located on the other side of closed or partly open doors. If warning devices sound on a different level of the residence from the bedrooms, then they are less likely to waken or alert people inside the bedrooms.

  • Page 86: Index

    Index Access Capability ... 39 Action Menu 1 ... 18, 28 Action Menu 2 ... 20, 29 Action Menu 3 ... 21, 30 Action Menu 4 ... 23, 31 Action Menus ... 28 Action Menus 1-4... 18 ADT Customer Monitoring Center... 9 ADT Service personnel working on system76 Assigning a Code and Card Cancel Date ...
  • Page 87 HOLDUP NOTE ... 13 Holiday ... 30 Holiday Dates... 51 Holiday Description and Dates... 49 Hstg ... 30 ID codes ... 23, 31, 32 INCIDENCE OF HARM... 80 Lesson ... 19, 28 LIMITATIONS OF THIS ALARM SYSTEM... 84 Load ... 23, 31 MALFUNCTIONS OF EQUIPMENT ...

  • Page 88: Limited Warranty

    ADT Security Systems, Inc. assumes no responsibility for any errors which may appear in this publication. ÊK3693-1SIA†Š K3693-1SIA 1/07 Rev A LIMITED WARRANTY workmanlike manner accordance ALL RIGHTS RESERVED ADT Security Services, Inc. One Town Center Road Boca Raton, FL 33486 Copyright  2007 with following conditions:...

Table of Contents

Save PDF