BRP I-Command Evinrude Etec Series User Manual page 91

WARNING MESSAGE DISPLAYED
No Oil RPM reductn see dealer
No Oil RPM reductn see dealer
Sensor malfunction service soon
Overheat RPM reductn chk water and manual Engine temperature above range
Injector malfunction see dealer
Engine Shutdown see dealer
Solenoid malfunction see dealer
Ignition malfunction see dealer
Fuel pump malfunction see dealer
Power valve malfunction see dealer
POSSIBLE CAUSE / PROCEDURE
Oil pressure pulses in manifold not detected
Oil system prime failure
Engine temperature sensor, Air temperature sensor, Oil
pressure circuit or Water pressure circuit fault detected
Fuel injector open or short circuit detected
Possible fuel leak. Seek assistance to return to harbor,
see dealer immediately.
Starter solenoid circuit open-circuit
Water injection solenoid open circuit
Ignition primary open circuit detected
Fuel pump open circuit detected
Exhaust valve solenoid open circuit
89