BRP I-Command Evinrude Etec Series User Manual page 73

4. Use the UP or DOWN buttons and select UNCFG TEMP.
Press ENTER.
5. Press ENTER to configure Temperature Sensor.
6. Use the UP or DOWN buttons to make selection.
Press ENTER.
7. The gauge will change the device setting and return to the BUS DEVICES
list.
Press EXIT three times to return to gauge display.
Water Temp
Configuring
Fuel Tank 1
Press ENTER UnCfg F Lev
to Configure Water Press
Temp Sensor Oil Tank
Storage Device
M E N U
5
Water Temp
Outside Temp
Inside Temp
Engine Room
Live Well
Bait Well
M E N U
6
Water Temp
Fuel Tank 1
UnCfg Temp
Water Press
Oil Tank
Storage Device
4
M E N U
Water Temp
Message
Outside Temp
Inside Temp Changing
Device
Engine Room
Live Well Settings
Bait Well
M E N U
7
71